Announcement

Collapse
No announcement yet.

indispensable tool

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gulf
    replied
    Re: indispensable tool

    I just built mine out of wood. Thanks for the tip. I will definately seal (paint) mine before I start. Maybe that will guard against warping.

    Leave a comment:


  • Wesleckner
    replied
    Re: indispensable tool

    I made my ID tool out of an old hing and yard stick. Just find the center of you oven take 1/2 the diameter of you circle for you radius. I made my oven 42 inches wide and 21 inches high. If you want a Guide for the angle of the bricks add 4 1/2 inches past the radius of the circle on your stick. If you are doing a low dome you may need to adjust the height of your dome to a lower height.

    If you have the ability make your ID tool out of metal, I made mine out of wood and it warped after a few days of being wet.

    Leave a comment:


  • TimEnzweiler
    started a topic indispensable tool

    indispensable tool

    Where can I purchase the "indispensable tool" to help align each firebrick within its course?
Working...
X