Originally posted by summerj
View Post
Announcement
Collapse
No announcement yet.
Has anyone used the Powder left over from cutting firebrick?
Collapse
X
-
Re: Has anyone used the Powder left over from cutting firebrick?
-
Re: Has anyone used the Powder left over from cutting firebrick?
It is not the same chemically, but it performs the same.
Leave a comment:
-
Re: Has anyone used the Powder left over from cutting firebrick?
I haven't been able to find fireclay in the bag locally. From what I have read though, it is one and the same.
Leave a comment:
-
Re: Has anyone used the Powder left over from cutting firebrick?
Thanks for the thread.
I am still unsure... IS this brick dust/ powder used instead of the fireclay when making the homebrew ?
Leave a comment:
-
Re: Has anyone used the Powder left over from cutting firebrick?
Originally posted by summerj View PostWell I am about to close in My dome. I Have been using the fine Sand, lime, fireclay, and portland cement as the reciepe calls for...However, I left my wet saw sit for about a month ( after cutting several firebricks.) All of the water evaporated and I was left with a Fire Clay Powder. Could this med. duty firebrick powder be of any use on the build? I have about 4 cups of it.
hope this helps.Last edited by Gulf; 08-26-2015, 10:31 AM.
Leave a comment:
-
Has anyone used the Powder left over from cutting firebrick?
Well I am about to close in My dome. I Have been using the fine Sand, lime, fireclay, and portland cement as the reciepe calls for...However, I left my wet saw sit for about a month ( after cutting several firebricks.) All of the water evaporated and I was left with a Fire Clay Powder. Could this med. duty firebrick powder be of any use on the build? I have about 4 cups of it.Tags: None
Leave a comment: