Tweet
Just picked up a Imer 350 saw...time to start cutting some bricks..
I'm doing something a little different, I made a 3 x 5 x 1/4" angle iron with a 10" grid of 1/2" rebar welded in place. Four 3/4" holes in the 5" leg to install clevis for relocating oven after completion. ....Nice winter project...
I'm doing something a little different, I made a 3 x 5 x 1/4" angle iron with a 10" grid of 1/2" rebar welded in place. Four 3/4" holes in the 5" leg to install clevis for relocating oven after completion. ....Nice winter project...