Cracks ??? How bad

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Les
    replied
    Re: Cracks ??? How bad

    Originally posted by Gulf
    Out side no...................inside?...................just, don't peak under the "covers" .
    I hear ya Gulf. That's the beauty of not using mortar where you can see it. On the back side of the brick - I have no clue. I am surprised that I see nothing in the entry - I did interlace the bricks pretty good so apparently the unit is one. Just waiting for the earthquake that is due, then we will see

    Leave a comment:


  • Gulf
    replied
    Re: Cracks ??? How bad

    Originally posted by Les
    Not true - I have yet to see one. No clue what is going on under the Dryvit
    Out side no...................inside?...................just, don't peak under the "covers" .

    Leave a comment:


  • Les
    replied
    Re: Cracks ??? How bad

    Not true - I have yet to see one. No clue what is going on under the Dryvit

    Leave a comment:


  • Gulf
    replied
    Re: Cracks ??? How bad

    Opinions are like cracks.............I mean cracks are like opinions.........Everybody................I mean............. every oven.............. has got one

    Leave a comment:


  • UtahBeehiver
    replied
    Re: Cracks ??? How bad

    I believe every oven has some cracks somewhere, if someone says their oven has no cracks then they are either a Politician or a used car salesman, LOL.
    Last edited by UtahBeehiver; 08-27-2014, 05:11 AM.

    Leave a comment:


  • GianniFocaccia
    replied
    Re: Cracks ??? How bad

    By wisdom you mean should of had more and bigger thermal breaks
    Nah! I got plenty thermal breaks and still got a tiny expansion crack here and there.

    Don't let 'em tell ya otherwise Every builder on this site has a crack

    Leave a comment:


  • boerwarrior
    replied
    Re: Cracks ??? How bad

    yes don't be worried - those cracks look smaller than normal!

    Leave a comment:


  • Bubb
    replied
    Re: Cracks ??? How bad

    By wisdom you mean should of had more
    and bigger thermal breaks. Thanks I'll finish
    The roof.

    Leave a comment:


  • UtahBeehiver
    replied
    Re: Cracks ??? How bad

    Those are wisdom lines.

    Leave a comment:


  • Bubb
    started a topic Cracks ??? How bad

    Cracks ??? How bad




    Now getting ready for party I pressure washed stone
    But not dome. I've used twice before this, but never this
    Long or hot? Started at 3 pm slowly over 2 hours up to
    600 between 5-9 pm was in the 650 range. So it was hot
    For 6 hours... Just saw these crack this morning? They look
    To me to be expansion cracks yea but this is normal
    Right!! Not to be worried by them life goes on.
Working...