30" Pompeii in Minneapolis

[gastagg]

Also, the pics are from before I "scratched" it. My "scratches" were not as good looking as the YouTube video I saw, but I think they will do the job.

[gastagg]

Got the scratch coat of stucco on...first time using stucco. I bought the good BASF premix stucco stuff with the fiberglass from the professional construction concrete supply place. The label was printed with the wrong mixing instructions. I downloaded the specs from BASF wall systems and it wasn't right either for mix amounts. The salesman was off in the amount each bag covered by 1/2...good thing I bought 2 bags. I was planning to do both base layers today but couldn't, so keeping the scratch coat damp through the night and am going to apply the brown coat tomorrow AM after picking up two more bags. Going to use Quikrete finish coat with some dark red coloring for the final coat, probably on Wed. We'll see.

You'll see on one of the pics where I am using a piece of pex tubing to act as a hard spacer to put the stucco against so the stucco does not butt against the flu arch. Will remove the pex and fill with high-temp caulk to provide the thermal break.

[mrchipster]

Nice work on the wire George. Looking great.

[UtahBeehiver]

Nice work on the wire lath layout. Look like you are golden on being ready to stucco. IMHO, I don't think you need to insulate past the inner arch but that is up to you. My vent chamber is not insulated and I can easily get 4 maybe 5 days work of cooking heat out of the oven (with a good door).

[gastagg]

Darin, thanks for the kind words! Couldn't have done it without the forum, that's for sure.

Are you saying that even with the thermal break, I'm going to get a lot of benefit (heat retainage in the dome) from insulating the outer arch?

[Novaslo]

It really depends on how you are going to use it. I insulated all the way. The intent is that the masterpiece is on the inside. However the bummer is that the inside entry will get black and dirty. Insulation cant be stressed enough. After you use it for a while you will want it to retain heat so that you can bake bread on day 2 and have the ability to cook for 3-5 days. Sometimes I will do Jerky or dry herbs on day 5. The next question is your enclosure, how are you going to keep it dry. You probably have that planned. Either way, you have a phenomenal build.

[gastagg]

Insulation and steel mesh today. Hot work today...in the 90s and high humidity. I think I'm ready for stucco. Any suggestions at this point before I stucco?

Also, is there any reason I should stucco over the brickwork? I was planning to, but it actually came out looking OK. I was going to put a black cement face on the front and take the stucco all the way to the face. The brick is looking good enough to keep exposed. Any opinions?

[gastagg]

Let's just say I was glad to get that last brick cut, which was the last brick (hopefully) of the build!

[UtahBeehiver]

looks very familiar, nice job on cutting out, kind of a B%&% to do huh......

[gastagg]

And here are the rest of the pics...

[gastagg]

Well I basically finished brick and mortar work today. I'll need to mortar in the chimney, but I got the vent arch and chimney mount finished up today. Will try to get the insulation and wire mesh done on Saturday. Thanks Russell for the idea on the chimney mount.

[gastagg]

OK, I'll just plan on that.

[UtahBeehiver]

G,

Why not just tapcon the wire strap to your concrete hearth, it will be covered up anyway by the stucco and wire. You won't have to worry about pull out on the concrete. I used CaSi too and I am not sure it will hold a screw very well.

[gastagg]

Think the liquid nails would be strong enough? I think that regardless of method, I'm going to attach to the concrete slab. Thanks guys. Bill, your dome came out looking very nice.

[william]

Hi
I tried to screw into the bottom insulation also and found it better for me to put concrete screws with a washer to tie a wire to into the cement pad around the perimeter, the stucco coats will cover them.
It worked well for me
Bill