Announcement

Collapse
No announcement yet.

Proposed door

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Proposed door

    I've yet pulled out the saw to continue work (supposed to snow again on Wednesday) - found a project that I can do in the cold. The door will be 4 inches thick - the size of my insulation board. I am going to have it cut from .060 stainless steel. The flames will be spot welded onto the face plate, unless I decide to paint them - then I will screw them onto the plate. The whole thing will be put together using stainless pop rivets. The attached drawing is just my CAD concept. What do we think, tacky or cool?

    Les...
    Check out my pictures here:
    http://www.fornobravo.com/forum/f8/les-build-4207.html

    If at first you don't succeed... Skydiving isn't for you.

  • #2
    Re: Proposed door

    cool bro!

    but you need some handles..

    flame handles?


    by the way.. my wife loves Harleys
    My thread:
    http://www.fornobravo.com/forum/f8/d...ress-2476.html
    My costs:
    http://spreadsheets.google.com/pub?k...Xr0fvgxuh4s7Hw
    My pics:
    http://picasaweb.google.com/dawatsonator

    Comment


    • #3
      Re: Proposed door

      Thanks Dave - After you mentioned flame handles I recalled that our shop cut flames into a pipe - how cool would that be. Come to find out, it's quite a pain for them to set the laser up to do that so I'm going with some cheesy handles I saw at Lowe's.

      If your wife loves Harley's - keep her, she's a good one

      Les...
      Check out my pictures here:
      http://www.fornobravo.com/forum/f8/les-build-4207.html

      If at first you don't succeed... Skydiving isn't for you.

      Comment


      • #4
        Re: Proposed door

        Originally posted by Les View Post
        Thanks Dave - After you mentioned flame handles I recalled that our shop cut flames into a pipe - how cool would that be. Come to find out, it's quite a pain for them to set the laser up to do that so I'm going with some cheesy handles I saw at Lowe's.
        Well we should all join in the search for flame handles! maybe one of us could come up with some.

        If your wife loves Harley's - keep her, she's a good one
        Definitely... but her hubby is a conservative accountant....
        ugh... I probably will never own a Harley! Poor girl...........
        My thread:
        http://www.fornobravo.com/forum/f8/d...ress-2476.html
        My costs:
        http://spreadsheets.google.com/pub?k...Xr0fvgxuh4s7Hw
        My pics:
        http://picasaweb.google.com/dawatsonator

        Comment

        Working...
        X