Announcement

Collapse
No announcement yet.

Angle meter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Angle meter

    Hi all,
    Just following a recommendation from a forum subscriber.

    I'm using this Angle Meter, borrowed from my next door neighbor (and pretty much ruined by now) to check my brick angles as I place them. I've been working without shims, except for the occasional time when I tamp the bricks down too far while setting them, then I use the shim as a wedge to boost it back up again.

    By this method, at least so far, I'm able to hand butter the bricks with mortar and do away with a grout bag. It works really well.

    I have no idea where to buy something like this. My neighbor can't remember where he bought it. Try Google????
    George
    GJBingham
    -----------------------------------
    Everyone makes mistakes. The trick is to make mistakes when nobody is looking.

    -

  • #2
    Re: Angle meter

    I think I got mine from Home Depot or Wal-Mart.
    Oven Progress
    Bread Photos
    Oven Stand Thread

    Comment


    • #3
      Re: Angle meter

      I was a carpenter for over 10 years and I never saw one of these before.

      Nifty gadget!

      Would of been handy to have for carpentry and oven building!

      Here are a couple links to purchase one.

      Find Angle Finder Magnetic Base, 4 1/8" and other Measuring Tools at Aubuchon Hardware

      Central Tools Angle Finder with Magnetic Base (CEN6494)

      Cheers
      My thread:
      http://www.fornobravo.com/forum/f8/d...ress-2476.html
      My costs:
      http://spreadsheets.google.com/pub?k...Xr0fvgxuh4s7Hw
      My pics:
      http://picasaweb.google.com/dawatsonator

      Comment


      • #4
        Re: Angle meter

        Also called a goniometer at least in medical practice.

        Comment


        • #5
          Re: Angle meter

          Here's the exact one at tool barn

          L.S. Starrett Angle Meters | ToolBarn.com


          Rich

          Comment


          • #6
            Re: Angle meter

            Just a note. I've used Starrett measuring tools for years, and they are among the best and most accurate out there. Don't have the angle gauge, though I probably should, but I do have a two foot and four foot level from them, plus a miter square, a tiny box square and some other stuff. Highly recommended.

            Jim
            "Made are tools, and born are hands"--William Blake, 1757-1827

            Comment


            • #7
              Re: Angle meter

              Originally posted by BaconGrease View Post
              Also called a goniometer at least in medical practice.
              Isn't a goniometer for measuring the size of the patient's... ?

              Comment


              • #8
                Re: Angle meter

                Originally posted by maver View Post
                Isn't a goniometer for measuring the size of the patient's... ?
                priceless

                Comment


                • #9
                  Re: Angle meter

                  Oooohhhhh..... Nifty!
                  "He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot

                  "Success isn't permanent and failure isn't fatal." -Mike Ditka
                  [/CENTER]

                  Comment


                  • #10
                    Re: Angle meter

                    Inclinometer - not sure about medical applications, although sounds like there could be some.

                    Can be had on eBay here for £15-£25 depending on the version.

                    :-)

                    W.
                    "Carpe diem." - Fish of the Day (The Uxbridge English Dictionary)

                    Comment

                    Working...
                    X