Suggestions for a paint/waterproofer for the dome?

[Neil2]

Re: Suggestions for a paint/waterproofer for the dome?

Regardless of the final coating, I would strongly recommend a vent of some kind at the top of the dome. You can get moisture build up and steam trapped in the insulation layer if you have a waterproof coating.

The vent on my current oven is simply a 1 inch diameter opening thru the stucco to the vermiclete layer. I then placed a copper plate loosely on top to prevent precipitation entering. I often get steam out of the vent for the first few firings in the spring.

[Bacterium]

Re: Suggestions for a paint/waterproofer for the dome?

Any you guys having trouble with your render coatings (particularly painted) bubbling? On my first oven I used a sealer they use in waterproofing wet areas, which goes under floor tiling. Then I painted the solar guard paint on top of that. It bubbled in a few area after a few months, I figured it was internal moisture through winter.

[OscarA]

Re: Suggestions for a paint/waterproofer for the dome?

Hi Dave

Point Works? Gen II | Selleys Australia

That's the one I used and I got it from Bunnings.
Just water it down by 20-25% and brush it on.

[cobblerdave]

Re: Suggestions for a paint/waterproofer for the dome?

Gudday Oscar
Could you use a brand name...I looked but couldn't find it

Regards Dave

[OscarA]

Re: Suggestions for a paint/waterproofer for the dome?

A forum member recommended I use flexible pointer which is used on roofing and it has worked a treat. I was told to water it down a little (added about 20 water) so you can brush it on. Do about 3 coats. It's worked for me and can be bought at Bunnings for around $40.
Hope that helps.

[ozziewaa]

Re: Suggestions for a paint/waterproofer for the dome?

Hi Dan

I finished my Pompei oven earlier this year and I finished off the dome and stand with Wattyl Solarguard. Easy to apply and very pleased with the finish.

I live is SA and my oven faces the west and reckon I will get more heat from the sun in summer than from the oven. I figured if the paint was OK for external use in Australia it would be fine for the dome.

No regrets with the paint I have chosen.

Good luck

Alan

[Wiley]

Re: Suggestions for a paint/waterproofer for the dome?

Dan,
I used an elastomeric paint which is commonly sold for painting trailers or roofs. It's a flexible acrylic based paint (white in color) which I tinted with the final color (also an acrylic based paint). Two coats of the stuff without tint, one coat with and two coats of the final paint. The coating so far has been great rain, snow, brushing with a scrub brush and soapy water (to remove pollen from alder trees...gets everywhere this time of year here) so far it has held up remarkably well and the color has not faded. It is supposedly stretchable so micro cracks should not be a problem. However, does still show soot staining over the entry.

Hope this helps,
Wiley

[wood fired dan]

I have rendered the dome and soon I will need to waterproof it and paint it as I don't want to stick with the render colour. What are people using for this?

Keep in mind that I have fired the oven several times and due to the insulation blankets I used the outside of the dome doesn't get any hotter than 40-50C degs so I don't need a product that can withstand high temps.

I would also like the product to fill any hair line cracks in the dome.

Cheers in advance for your suggestions.