Wood fired oven corner build in Grafton NSW

[Bacterium]

Re: Wood fired oven corner build in Grafton NSW

Ditto....nice work there. It becomes a bit of a haul, but there are moments of fulfillment.

[oasiscdm]

Re: Wood fired oven corner build in Grafton NSW

Hi Wayne

Nice work, looks great. Wish I could get more done on mine, currently only getting about 2 half days on weekends to work on mine.

Keep up the good work.

[Wayne73]

Re: Wood fired oven corner build in Grafton NSW

Progressing slowly, at the moment I'm getting a coase laid every three days and Im getting a little frustrated ,cleaning bricks cutting the arch angle off and laying them.

The forth coase.











Looking back I wish I did'nt get these bricks.
Though Im happy I'm slowly getting some where

[Wayne73]

Re: Wood fired oven corner build in Grafton NSW

Hi David
Igloo and I'm not going to render it, I'm going to box it in.
Though since the oven is only 100mm off both brick walls i dont think its going to be an easy build.

[david s]

Re: Wood fired oven corner build in Grafton NSW

Igloo or doghouse Wayne?
If an igloo it looks like you are going to have some difficulty doing the rendered outer shell at the back.

[cobblerdave]

Re: Wood fired oven corner build in Grafton NSW

Gudday
Slows good.... That's a very neat job you have done there! Just take your time it'll get there

Regards dave

[Wayne73]

Re: Wood fired oven corner build in Grafton NSW

I found getting the floor level a real b1tch, it took me about five goes but I got then in the end.
I had enough full bricks to do the 1st coase and now down to my arch bricks,which I have to cut both angles off so that really slows things down.

Anyway I'm slowly progressing.

[Wayne73]

Re: Wood fired oven corner build in Grafton NSW

Hey Doug, I made some changers, does this look like it will work?

[Wayne73]

Re: Wood fired oven corner build in Grafton NSW

Thank's Doug,
I was a bit unsure about that and how it was all going to tie in myself.
I'll try and get my head around it tomorrow.
Cheers

[Wayne73]

Re: Wood fired oven corner build in Grafton NSW

I ended up going with half a brick for the inner arch and have done a dry run just to see how it looks.
Still haven't leveled the floor yet, will have a go at it when Ive got plenty of time hopefully Thursday.

[Wayne73]

Re: Wood fired oven corner build in Grafton NSW

I got hold of a brick saw off a friend of a friend and I can have it as long as I need.
So at this stage Ive marked and cut the oven floor, Ive got plenty of bricks so I was able to stand them on there side for the extra themal mass.
One thing I'm not sure of is the length of is the arch bricks, is a full brick, half a brick or somthing inbetween?

[Wayne73]

Re: Wood fired oven corner build in Grafton NSW

No problems here at the moment Colin, im still here cleaning bricks

[oasiscdm]

Re: Wood fired oven corner build in Grafton NSW

WaynE

Noticed On The News That Grafton Is Flooded Hope You And Family Are All OK And On High Ground

Stay Safe

[Wayne73]

Re: Wood fired oven corner build in Grafton NSW

I just thorght it would be easier to start them that way and I didn't think I would have to cut an angle at the top because of the arch bricks im using.
Ok having said that if I cut them in half and lay them horizontal them from the start, I would be better off cutting the tapper off then reversing every 2nd brick ?

[Wayne73]

Re: Wood fired oven corner build in Grafton NSW

In between cleaning bricks today I had ago at positioning them, to get an idea how things will look.
All my bricks are arch bricks (except the oven floor).So to get the right circumference for my oven Ive had to reverse every 2nd brick.
Will this be ok to build the whole dome this way?