If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Sorry Dave..... Is there a tutorial for doing that on the FB site?
My build's going well and I've just finished the third ring of bricks in the dome above the upright "wall" bricks. This almost takes me clear of the entrance arch.
One aspect of the build has been a lucky "accident" when cutting all my bricks in half with a disc cutter. Because they're recycled bricks from an old bakery the width I needed for the dome was less than half the length of each brick so, when I cut the length I needed from each good end of the brick I was left with a little "biscuit" of brick which I could cut into firebrick shims. So I'd lay a brick in against the polystyrene former, butter it up and slip a firebrick shim in to keep it true. Works really well!
But the whole process is flying by the seat of your pants and thinking each step through to keep mistakes to a minimum.
Aiming to have the oven fired in gradually and cooking by 23rd August which is our Highland Games day here on the island.
One month in Turkey coming up too!
Kindest regards.... Mike
Last edited by Mike Spear; 06-04-2014, 01:27 PM.
Reason: Forgotten script
G'day Mike
When your in the post reply window you'll see a smiley face at the top and a paper clip icon next to it. Click on the paper clip I icon and it open A window that will enable you to browse for a pic and upload it. When you close the window you find clicking on that paper lip icon it will contain your pics. You can upload I pic for tho iPhone and up to 5 got the computer
Regards dave
Measure twice
Cut once
Fit in position with largest hammer
Comment