New user from Florida

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rangebob
    Serf
    • May 2012
    • 8

    #1

    New user from Florida

    Anybody in the Central Florida area that has already built. I've got my base and insulating layer poured. I'm in the process of burning out a bunch of cutoff blades. I need to see if I can find an 6-8" blade so I don't have to cut 2 sides and have a real rough center.
  • JurisP
    Serf
    • Apr 2012
    • 2

    #2
    Re: New user from Florida

    Range bob--I'm hoping to start one this fall in Dunedin, FL. How did you make out with permitting, our bldg dept is pretty hard nosed.

    Cutoff blades, I've had good luck cutting masonry and tile with a segmented diamond blade for a skil saw. They hold up well and are pretty cheap. You can even drizzle water on the cut to keep down the dust. Not sure how they'll work on firebrick.

    Keep on posting!

    JurisP

    Comment

    • Gulf
      Member Moderator
      • Sep 2011
      • 3883

      #3
      Re: New user from Florida

      Originally posted by rangebob
      I need to see if I can find an 6-8" blade so I don't have to cut 2 sides and have a real rough center.
      I am not sure what you are using for a saw, but a diamond blade will pay for itself several times over vrs. cut off blades.
      Joe Watson " A year from now, you will wish that you had started today" My Build Album / My Build

      Comment

      • Lburou
        Il Pizzaiolo
        • Dec 2010
        • 1165

        #4
        Re: New user from Florida

        I bought a wet saw on craigslist for $250, used it a lot, and sold it for $250 when I was done. Was a good saw and saved a lot of time and effort.
        Lee B.
        DFW area, Texas, USA

        If you are thinking about building a brick oven, my advice is Here.

        I try to learn from my mistakes, and from yours when you give me a heads up.

        Comment

        Working...