If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Trenching for the gas line. We installed a 1" line to support the new appliances and ensure we didn't lack volume. The gas company installed a new meter specifically because of what we are planning.
I tunneled under our driveway cross walk to get the line over in close proximity to the meter. This was a helluva lot harder than I thought it would be. Finally got it but what a pain. I used all poly gas line and unions.
This shows the rebar tie ins we installed in the footings so we could tie the slab in. The post brackets all had to be set at the same height which was more difficult than I planned but it all worked out. One ended up being about a 1/2" lower than the others but not a big deal.
Comment