Guys, I really want to make the edge/bull nose on my concrete countertop about 30mm thick. I'm wondering is this pushing my luck, does it need to be thicker? Are others doing it at 50mm or how thick? This would really be only the 40mm overhang, the rest of it would be a little thicker, probably up to 50mm.
I have a fine steel reinforcement mesh, squares about 40mm and gauge about 3mm thick. I'm using sand cement mix.
Thanks
R
I have a fine steel reinforcement mesh, squares about 40mm and gauge about 3mm thick. I'm using sand cement mix.
Thanks
R
Comment