If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Last year I had completed the dome, and the side walls of the entry. I started brick cutting by raising the side walls up above the dome, and squaring up the hole.
Another view:
This piece of luan is the shape of the bottom of the funnel
This post continues the construction of my oven - Part one was in the pompeii thread, and last year's masonry season ended with the oven built and the enclosure built up above the dome.
So: Spring is here, the birds are singing, the flowers are blooming,
and it's time to get back to work.
I first used refractory mortar to attach the two halves of the refractory flue tile funnel together:
I need to offset the flue to make room for the things that are going in above the oven, so the funnel gets tilted back and to the right:
Measuring the amount of bottom tilt needed to make the right side vertical.
Leave a comment: