All of the doors I have seen look like they close the oven before the vent/transition. Has anyone considered installing a damper in the chimney and putting doors on the outside of the oven, after the vent? I can think of a few advantages to this type of design.
1. controlling heat flow by adjusting the draw of the oven via the damper
2. This design would allow for hinged doors rather than a wedged door.
Any thoughts ?
Thanks
Bruce
1. controlling heat flow by adjusting the draw of the oven via the damper
2. This design would allow for hinged doors rather than a wedged door.
Any thoughts ?
Thanks
Bruce
Comment