If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I've been getting a lot of help from you all in planning my oven build, thanks.
I'm about to start my build and have bought three 2" FB ceramic boards for below the floor.
Since I am building a 42" Pompeii it seems that three boards does not quite cover the complete wall unless I make some extra cuts in the board. I cam up with this plan and I wonder what you all think. I have never worked with this board material so I wonder if I am dreaming that I can make these cuts cleanly.
The plan is to use two full size boards and cut one into three 8" wide boards and place them like in the attached image.
Comment