Finding local building materials

[texman]

Re: Finding local building materials

Try Larkin Refractory in Georgia. They ship anywhere i think.

[Dagored154]

Re: Finding local building materials

finding building materials in central Pennsylvania, USA has been very difficult. It has been impossible to find a bag of fire clay to mix with the sand to set the fire brick in on the hearth. I ended up cutting the fire brick in half to get some clay to use in the first layer. that provided me some and was very time consuming. we broke a few bricks and beat them into powder which also took hours and sore forearms. That is just nuts! since I can't find fire clay to mix with the oven mortar I have switched to using High Heat 50 at $90/bag. good luck finding a local source for fire clay.

[Dagored154]

Re: Finding local building materials

I found a supplier of silica sand for my mortar. should I use fine silica sand or coarse silica sand?

[Dagored154]

Re: Finding local building materials

Why can't I use the pre-mixed high heat refractory mortar? I just read that statement in the Forno Bravo plan book and don't understand why not.

[Husker25]

Re: Finding local building materials

you might try Larkin refractory. larkinrefractory.com
1.80/brick but lots of shipping cost.

Thanks Texman. I actually find a supplier down in Denver for $1.84/brick. Threewit-Cooper Cement Co. They also had Heat Stop 50 for $80/bag.

[texman]

Re: Finding local building materials

you might try Larkin refractory. larkinrefractory.com
1.80/brick but lots of shipping cost.

[Husker25]

Re: Finding local building materials

Hi guys-has anyone come across a good supplier for fire bricks close to Salida, CO? I found a place down in Denver selling them for $2.75/ea.

[Dabouv1]

Re: Finding local building materials..Portland or

I have, recently, sourced all the necessary materials in the great portland or area. If you need help, please email me at through the forum. It has all been great fun.
-Brad

I am starting on my dome. I found harbison walker has Carter brand bricks that are medium duty and almost identical to FB's in composition. only a few outlets stock them but was able to do transfer from wa. Warehouse to Portland cheaply. I paid 1.76/brick. I think it will go up a little. Casey was very helpful at harbison walker. Western Ceramics (Chuck) also was helpful. They have 2nds of Calcium silicate board (they may be 1/4 inch off on width or length for instance) that were a fraction of the cost and saved me a bundle. They also are selling ceramic blanket, insulfrax, at 1.10 sq. foot which was also much less than elsewhere.

[johnnybrewmeister]

Re: Finding local building materials

source for fire clay in San Diego?
recommended type of clay?
Thanks!

[dconnolly]

Re: Finding local building materials

does it make a difference if I use low duty or medium duty fire brick.... Both are about $1.50 a piece

The medium duty bricks will take more heat....I would opt for them. I am using these in a wood buring fire pit to accompany my oven.

[Bort jr]

Re: Finding local building materials

I have, recently, sourced all the necessary materials in the great portland or area. If you need help, please email me at through the forum. It has all been great fun.
-Brad

[Hank10746]

Re: Finding local building materials

I have checked with local masons and potters. It seems ther is only one source of firebrick in the Us A company in Ohio and they make only 26% alumina brick. and only in a few sizes aroun 8-9.5" by 2-4" by 4 - 4.5".

I wish FB woudl sell their bricks esp the 12x12. or sell a kit that is in the 27" range. 36" is just too big for our needs - more wood wasted heat and polution. longer heat time. 2 or 3 batches 3 loaves of bread is plenty for a small family.

Does anyone have experience with soapstone for an oven floor? no seams and looks nice. heat transfer is 4x brick.

Hi
I thought the same thing after 3 weeks of looking around Hemet Ca. and not even finding a brick but after looking on the Internet for Refractory brick or Castable Refractory cement and a couple leads from the people on this forum I found 10 or 15 places around the country. I have found that almost every Metropolitan area has a Refractory products reseller or manufacture. You just have to use some common industry terms and you will find them. Also look for a clay brick manufacture and they should know where they are made if they don't make them. That's where I am getting mine. I found several around the East coast. Hope it helps.

ANH REFACTORIES
West Haven, CT 203-934-7960 203-934-4912 Bob Riccio They are all over the US
163 Boston Post Road Joseph Chandler
West Haven, CT 06516-2026

EMPIRE REFRACTORY SPECIALISTS, INC.
1273 24th Avenue Hueytown, AL 35023
Phone (205) 426-4000
Fax (205) 426-4053

Ron Snell, President
rsnell@empire-refractory.com
Larry Davis, Projects Manager
ldavis@empire-refractory.com
Ron Kehl, Sales Manager
rkehl@empire-refractory.com
Gene Camp, Key Account Manager
gcamp@empire-refractory.com
Margie Hampton, Sales Representative
mhampton@empire-refractory.com
David Hampton, Projects Manager
dhampton@empire-refractory.com


Related offices and companies?

Ft. Wayne, Indiana
Indianapolis, Indiana
Chicago, Illinois
Grand Rapids, Michigan
Toledo, Ohio


Contacting Elite Deals:

Toll Free: 1-800-618-0601 Hours: M-F 8:30 am - 5:30 pm CST
Outside the USA: 1-901-363-8300
Fax: 1-877-293-4546
Mail: 3953 Hickory Hill Road
Memphis, TN 38115
Email: info@elitedeals.com


Just 3 but they are all over the place. Shipping is to high so you do want to find one you can pick up from.
Hank

[edsalldw]

Re: Finding local building materials

I have checked with local masons and potters. It seems ther is only one source of firebrick in the Us A company in Ohio and they make only 26% alumina brick. and only in a few sizes aroun 8-9.5" by 2-4" by 4 - 4.5".

I wish FB woudl sell their bricks esp the 12x12. or sell a kit that is in the 27" range. 36" is just too big for our needs - more wood wasted heat and polution. longer heat time. 2 or 3 batches 3 loaves of bread is plenty for a small family.

Does anyone have experience with soapstone for an oven floor? no seams and looks nice. heat transfer is 4x brick.

[Tscarborough]

Re: Finding local building materials

Not only are they not safe, they are not efficient unless integrated into the design of the oven.

[dmun]

Re: Finding local building materials

We do not consider gas burners safe in domestic ovens, and discourage their use, and the discussion of how to build them.