Concrete Pad Depth in Mass

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Eddie4
    Peasant
    • Jan 2008
    • 33

    #1

    Concrete Pad Depth in Mass

    Hi,
    anyone know the best depth for the pad for us New Englanders?
    Any help would be great.

    Ed
  • dmun
    Il Pizzaiolo
    • Jul 2005
    • 4218

    #2
    Re: Concrete Pad Depth in Mass

    The standard four inches of reinforced concrete on top of six inches of well drained crushed stone will work fine in almost all climate and soil conditions, if you are building a normal height freestanding oven.

    Footings below the frost line are only used in special circumstances.
    My geodesic oven project: part 1, part 2

    Comment

    • Chef
      Apprentice
      • May 2008
      • 175

      #3
      Re: Concrete Pad Depth in Mass

      Eddie:

      We are in North Providence RI just a bit down the road from you 3 years ago we built our oven, we went down one foot! It may be over kill but we did not want to take any chances!
      Check out our blog for a glimpse into our hobbies of home brewing, soda, beer and wine, gardening and most of all cooking in our WFO!

      http://thereddragoncafe.blogspot.com/

      Comment

      • Neil2
        Il Pizzaiolo
        • Oct 2006
        • 1374

        #4
        Re: Concrete Pad Depth in Mass

        4 inches of concrete with reinforcing is plenty. Use something like 3/8 rebar on 8 inch grid both ways with the ends either "hooked" or with 10 inches bent right angles and tied to outside row.
        Last edited by Neil2; 08-28-2010, 10:44 AM.

        Comment

        Working...