hi, i have been reading and learning a lot in this forum over the last weeks - thanks to everyone for posting.
i am still in the planning stage, but was wondering if it would be possible/advisable to put a WFO underneath an existing deck, which has 3 open sides. the underside of the deck is made out of corrugated iron sheets (to catch the water from above and divert it to the outside). the oven wouod be sitting on the brickwall of the house.
how much distance would i need from the top of the flue to the corrugated iron for the oven to draw properly?
or would the flue need to be extended and routed to the outside of the deck area?
hope that made sense.
thanks in advance for answers.
fritz
i am still in the planning stage, but was wondering if it would be possible/advisable to put a WFO underneath an existing deck, which has 3 open sides. the underside of the deck is made out of corrugated iron sheets (to catch the water from above and divert it to the outside). the oven wouod be sitting on the brickwall of the house.
how much distance would i need from the top of the flue to the corrugated iron for the oven to draw properly?
or would the flue need to be extended and routed to the outside of the deck area?
hope that made sense.
thanks in advance for answers.
fritz
Comment