I built a Pizza oven that includes a natural gas burner I had made for it. The oven will go as high as 800 - 900 degrees. I need a way to control the temperature.
Currently the gas is fed by a hose using a standard gas shut-off valve. This works fine but does not allow me to have much control over the temperature.
I need advice on two options.
1. A natural gas valve I can use to gradually increase the flow and control the temperature.
2. (Ideally) a setup with a thermometer that will automatically increase the flow of gas to the burner bases on a pre-set temperature.
Has anyone done either of these before?
If so, can you help me find what I need?
Currently the gas is fed by a hose using a standard gas shut-off valve. This works fine but does not allow me to have much control over the temperature.
I need advice on two options.
1. A natural gas valve I can use to gradually increase the flow and control the temperature.
2. (Ideally) a setup with a thermometer that will automatically increase the flow of gas to the burner bases on a pre-set temperature.
Has anyone done either of these before?
If so, can you help me find what I need?
Comment