Super Excited to start new project

[V-wiz]

Re: Super Excited to start new project

Little Update: Yesterday i picked up over 600 used bricks that were removed from a 1930 fireplace & outdoor/patio chimney.

[V-wiz]

Re: Super Excited to start new project

I need HELP guys, can you guys tell me if these are any good? he is asking 0.85 cents each brick. FIRE BRICK All Sizes Take one or All. Will these work. They are almost square, and there are other shapes too. He said they are not brick sized. The size 8 1/2 x 8 1/2 x 3 1/2"

[V-wiz]

Re: Super Excited to start new project

Here are some photos he sent me.



The stamped brick is 9 x 6 x 2 1/2. Is that good enough.

[Tscarborough]

Re: Super Excited to start new project

They look like firebrick to me.

[V-wiz]

Re: Super Excited to start new project

Right, but will these dimnesions work for the dome? Thanks

[Laurentius]

Re: Super Excited to start new project

Yes, you will have to do some cutting anyway, not many on this forum use full bricks to construct their domes. At .85c a brick that a good buy, jump on it if you can afford, or make an offer to see how low he will go, if you are ready to buy.

[V-wiz]

Re: Super Excited to start new project

Im offering $250 for 325 pieces. Will that be enough?

[Laurentius]

Re: Super Excited to start new project

You're have to make the offer with the seller. So, you're trying to save about .9cents a brick? Why not .20 cents per brick, but if all fail be willing to pay the full .85c, which is still a fair bargain.

[V-wiz]

Re: Super Excited to start new project

You're have to make the offer with the seller. So, you're trying to save about .9cents a brick? Why not .20 cents per brick, but if all fail be willing to pay the full .85c, which is still a fair bargain.

Im sorry, he accepted $250, but i think i can get him to go lower, My question was will 325 bricks be enough? i plan on laying some on the floor of a grill which i plan to build. I think about 270 bricks go into a 42" oven? am i right?

[V-wiz]

Re: Super Excited to start new project

I found very minimal info on these bricks, if you look at the craigslist add, the brick says Aladin 80. Is that the Manufacture? .

http://jjmedina.com.ec/HW132_High_Al...k_Brochure.pdf

ALADIN? 80 An 80% alumina brick produced from imported
calcined bauxite. Has good hot strength, predictable reheat
expansion characteristics, and good thermal shock resistance.
Can be used in the lower calcining and cooling zones where
greater refractoriness is required.

http://msds.domamer.anhamer.anhrefra..._%28USA%29.pdf

Does this stuff sound dangerous to you?

[UtahBeehiver]

Re: Super Excited to start new project

They look alot like the bricks I used in my build which were 9 x 5.875 x 3 which I cut in half and used on my dome and arch. Look at my picture log.

[Laurentius]

Re: Super Excited to start new project

Sorry for the misread, thats more than enough.

[Gulf]

Re: Super Excited to start new project

80% Alumina, Ouch! I believe that I could have finished my oven with just one blade had I not have tried to cut a 70+ alumina rotary lime kiln brick for my retainer wall .

[V-wiz]

Re: Super Excited to start new project

They look alot like the bricks I used in my build which were 9 x 5.875 x 3 which I cut in half and used on my dome and arch. Look at my picture log.

Deffinetly nice build, Your bricks have some stamping too..

[V-wiz]

Re: Super Excited to start new project

Sorry for the misread, thats more than enough.

Ok thanks, I need some for the floor of the Grill also so ya.