Forum Notice: The forum has been upgraded and restored to November 2. Posts and new accounts created after November 2 were lost. Sorry for the inconvenience.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Conservatively, 95% of all ovens built using fire brick are built with low-duty firebrick. High duty firebrick are used in rolling kilns (cement plant) for example, while medium duty are used in commercial boilers and furnaces, etc.
edit- This is the real criteria for high-medium-low firebrick:
High: Highly abrasive and extreme heat.
Medium: Ablative and abrasive applications at high heat.
Low: Mildly abrasive at medium to high heat.
Last edited by Tscarborough; 10-16-2013, 12:05 PM.
Conservatively, 95% of all ovens built using fire brick are built with low-duty firebrick. High duty firebrick are used in rolling kilns (cement plant) for example, while medium duty are used in commercial boilers and furnaces, etc.
edit- This is the real criteria for high-medium-low firebrick:
High: Highly abrasive and extreme heat.
Medium: Ablative and abrasive applications at high heat.
Low: Mildly abrasive at medium to high heat.
[QUOTE=Moose4Life;163705]So you believe the low duty firebrick is going to be just fine. Would hate to put in all this work just to find out it's not[/QUOT
Hi Moose,
Please trust the members here, everyone is pulling for your success, there nothing in it for anyone, to steer you in the wrong direction, it's a support mentality here.
Comment