SuperIsol Installation for 42" Pompeii

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hendo
    Journeyman
    • Oct 2006
    • 257

    #16
    Re: SuperIsol Installation for 42" Pompeii

    I concur with David - it's nasty stuff. I had only straight cuts, so noise wasn't a problem - a fine toothed hand saw went through it easily. For a circle, a jigsaw with a fine blade would probably be the way to go, or a fine keyhole saw. This stuff is brittle, and it chips and dents easily, especially at the start and end of cuts!

    Comment

    • Les
      Il Pizzaiolo
      • Sep 2005
      • 2945

      #17
      Re: SuperIsol Installation for 42" Pompeii

      The mask sounds like a great idea for that product - in regard to noise, I've been to a few too many Black Sabbath concerts for that to be an issue.

      So far, I've been cutting my pavers and island brick without a mask - after my shower, my nose is clean, so that's probably a good indicator that the wet saw is working (I hope).

      Les...
      Check out my pictures here:
      http://www.fornobravo.com/forum/f8/les-build-4207.html

      If at first you don't succeed... Skydiving isn't for you.

      Comment

      • RTflorida
        Il Pizzaiolo
        • Jan 2007
        • 1446

        #18
        Re: SuperIsol Installation for 42" Pompeii

        Just don't lean in too close to the mist...or turn the pump volume down just a bit to avoid the mist (thats what I did). I can't stand wearing a mask in FL heat and humidity.

        Comment

        Working...