web analytics
Ceramic board layout 42" Pompeii - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
No announcement yet.

Ceramic board layout 42" Pompeii

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ceramic board layout 42" Pompeii

    Anybody have a picture or drawing of the board under there 42" Pompeii??? Confused on how much I need to buy

  • #2
    My Ca Si sheets were 12 x 36 and staggered joints. The black insulation under the CaSi is FoamGlas insulation which will not absorb water.
    Russell
    Build Link............... Picassa Photo Album Link

    Comment


    • #3
      The first layer of firebrick doesn't need to sit on the insulation?

      Comment


      • #4
        I used a cad program to do much of my layout, including how to fit my board in under the dome. The attached link shows how I did it. I used 2 layers and was able to make the second layer a mirror image so that most of the seams didn't align, although I don't know if that makes any difference or not. You will undoubtedly end up needing to cut some of the board. I used a sawsall and wore the respirator the family bought me for the build.
        I've been working on my oven for a little while and have been debating starting a build thread, as I probably won't have much to add in terms of artistry or inventiveness over the excellent work already posted on this forum. That said, I thought I would share what I have done and hopefully continue to get
        My build thread
        http://www.fornobravo.com/community/...h-corner-build

        Comment

        Working...
        X