Steel work table for stand?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • saenns
    Serf
    • Jul 2018
    • 4

    #1

    Steel work table for stand?

    I'm planning a ~30" castable oven. I would like to re-use an existing concrete pad in my backyard as a foundation. For the stand, has anyone ever used a work table like this?



    Seems like a convenient solution and good dimensions (60"W x 36"D x 34"H). I haven't encountered any precedence for this in my research - is there a good reason for that or did I not search enough?
  • UtahBeehiver
    Member Moderator
    • May 2012
    • 5261

    #2
    There are a few metal stands on the fourm, most custom fabricated. With a 30" oven, are you talking OD or ID, I am not sure you can fit a 30" ID on this footprint. 30" ID, 2 X 2" cast wall (4") 2 X 2" insulation (4") and final outside coat, assume stucco 2 X !" (2") = 30+4+4+2= 40"
    Russell
    https://photos.google.com/album/AF1Q...L9lr_UnUgJbF3Z

    Comment

    • saenns
      Serf
      • Jul 2018
      • 4

      #3
      That's a good point, I hadn't considered the width of insulation and stucco. Has anyone done an elliptical shape dome? Maybe it could be slightly wider than it is deep. Or maybe the concrete base layer can cantilever/extend a few inches beyond the steel table top, like an overhanging countertop.

      Comment

      Working...