Announcement

Collapse
No announcement yet.

Measuring your Hearth

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Measuring your Hearth

    If the picture is uploaded, and you can find it, you can left click on the image, select "copy image location", then in your post you can hit the postcard icon over the box where you type. This brings up a dialog box where you can paste the location (or URL) of your picture, and it will show up right in your post,



    Like this.
    My geodesic oven project: part 1, part 2

    Comment


    • #17
      Re: Measuring your Hearth

      Ok,
      I will try this !
      thank you,
      EatingMoreFood

      this is a test....

      http://www.fornobravo.com/forum/memb...0-dig-hole.jpg

      Comment


      • #18
        Re: Measuring your Hearth

        Hi all,
        Here is the slab with concrete blocks, lots of rebar and crushed stone topped with 5 in concrete hearth to date. I added 20% extra crushed rock and sand to the mix. All wood and rebar was recycled, donated by local construction sites. The HD tie down strap really helped keep frame together nicely.
        Left the heavy strap on for 1 week now. I am told concrete dries and hardens over several months. Any thoughts?
        Still figuring out the picture upload. These are all in my album.
        EatingMoreFood

        ---
        http://www.fornobravo.com/forum/memb...ish-drying.jpg
        Last edited by eatingmorefood; 10-27-2010, 07:53 AM.

        Comment


        • #19
          Re: Measuring your Hearth

          Ok,
          Now I need to know how to get the thread started !
          thank you,
          EatingMoreFood

          Comment


          • #20
            Re: Measuring your Hearth

            "no more that 60% of the dome height"

            The "magic number" is 63%. No more, no less.

            Comment

            Working...
            X