My Casa2G came with a slightly warped floor piece that presented a small lip on the left side. The corners of the pieces meet, but the mid section does not line up.
When I called Forno bravo about this, they said that this generally doesn't pose a problem, I asked about grinding it down, and they said don't that the floor surface was different than the inner block and that would be a bad idea.
I just got my peel, and while doing a curing fire, played with it a bit. It in fact seems to catch pretty bad. I feel like using a dremel to bevel the back tile would help immensely - does anyone have any advice on this?
[sorry - photo is posting upside down, but side closer to fire has lip]
-Preston
When I called Forno bravo about this, they said that this generally doesn't pose a problem, I asked about grinding it down, and they said don't that the floor surface was different than the inner block and that would be a bad idea.
I just got my peel, and while doing a curing fire, played with it a bit. It in fact seems to catch pretty bad. I feel like using a dremel to bevel the back tile would help immensely - does anyone have any advice on this?
[sorry - photo is posting upside down, but side closer to fire has lip]
-Preston
Comment