how many thermocouples?

[kbartman]

Re: how many thermocouples?

Ok purchase my IR thermometer from THERMO TECH Non-Contact Infrared Digital Thermometer w/ FREE Holster (-58? To +1022? F) I probaly should of held out for the higher range but was happy with the price, so i bought it.

I found this temperature controller to use as my thermocouple read out.....Autonics TC Series PID Temperature Controller | Temperature Controllers | Instrumart What you all think?

[Laurentius]

Re: how many thermocouples?

[QUOTE=kbartman;155836]Ok purchase my IR thermometer from THERMO TECH Non-Contact Infrared Digital Thermometer w/ FREE Holster (-58? To +1022? F) I probaly should of held out for the higher range but was happy with the price, so i bought it.

Why? I can't think anything that cooks at 1022F. Will it also be used as a crematorium?

[kbartman]

Re: how many thermocouples?

LOL.............Only if the wife give me trouble

[kbartman]

Re: how many thermocouples?

I was able to get my temperature monitoring system up and running over the weekend. Attached are a few pics to show some detail. The temperature controller is mounted in a swing out configuration that can be neatly tuck away to preserve ambiance and satisfy a few critics. I still need to finish the aux jacks and put on the permanent switch location labels and face plate. My final plan is to use the output of the controller to some how control oven temp. If anyone would like some further detail or has any questions ask I will try to help.


Here are my locations:

1 Enclosure top outside insulation air space
2 Top of dome inside brick, 1" from face
3 Top of dome on outside brick face
4 Right side mid dome inside 1" from brick face
5 Right side mid dome on outside brick face
6 Floor right on outside brick face
7 Floor center on outside brick face
8 Left side mid dome inside 1" from brick face
9 Left side mid dome on outside brick face
10 Aux 1 temperature jack
11 Aux 2 temperature jack

I think I now have enough.....................