Announcement

Collapse
No announcement yet.

Oven stand dimensions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oven stand dimensions

    Okay, so here's a dumb question: I am installing a Casa2G100 oven and it calls for a stand 54" x 61". Using 8x8x16 or 8x8x8 inch blocks, how do I achieve those dimensions? Thanks!

  • #2
    Re: Oven stand dimensions

    Make the joints wider.

    Comment


    • #3
      Re: Oven stand dimensions

      If the joints get really wide, you can easily cut CMUs -- using a masonry blade on either a skill saw or grinder. It's noisy and dusty, but it isn't difficult.
      James
      Pizza Ovens
      Outdoor Fireplaces

      Comment


      • #4
        Re: Oven stand dimensions

        You could make it 56 X 64 and have a slightly larger stand ( actually less than that because the blocks measure about 3/8" less than stated measurements) by dry stacking them and filling the cores.
        Eric

        Comment


        • #5
          Re: Oven stand dimensions

          Thanks, guys! I appreciate the help.

          Comment

          Working...
          X