32" Oven in Sherman Oaks

[cholme]

Re: 32" Oven in Sherman Oaks

Well I made some great progress and am hoping to have a full day today. I made my own version of "the indispensible tool". Jim made some nice plans found at http://www.fornobravo.com/forum/f28/...heme-2985.html. His are a bit more elaborate and ultimately a better tool, but if you want something pretty simple mine works pretty well.

After getting into the project I am happy I decided to taper the bricks, it really reduces the mortar and seems like it will be more sound construction.

I am very impressed with so much of the workmanship I see posted in this forum, and even more impressed after starting this project.

[cholme]

Re: 32" Oven in Sherman Oaks

I made some progress last weekend. I laid out my floor and cut the bricks, and even got them set using the mortar/sand mixture (1:1).

Unfortunately, I came across a couple of flaws in my hearth design. Both are things I literally added or changed at the last minute. First, I decided to add a small counter area in front of the oven opening. When I was building the forms I thought "it doesn't need to be the full 7in thick, I will only make it the thickness of the top." Well, now I have a 12in counter that is supported by a flakey mixture of cement and vermiculite; granted I have re-bar, but I still don't like it. I will wind up building a metal support and I think that will solve the problem.

The other issue is that I mis-measured when I set the floor so it is too far to the right. I will have to figure out how to build my enclosure in a much smaller area than anticipated. Still a fixable problem.

My advice is if you are going to make changes to a plan, make sure you thing it through, don't just pull the trigger.

I am using Pacific Clay bricks that I ordered through Home Depot at $1.16.

[cholme]

Hello,


First, I want to say that out of the all the forum groups I belong to, this one is by far the best. All of you have great information and it really seems like a little community.

I got it in my head about 4+ years ago that I wanted a pizza oven. I was initially looking at the barrel design and actually bought plans from someone online. I then found FB. After researching a bit I started leaning toward the Pompeii oven design? it didn?t hurt that Pompeii is one of my wife?s and my favorite places.

So I started to lay it out in my yard and in SketchUp. We determined the right spot for the location and about 3 years ago had a pad poured to house a BBQ station and our pizza oven? then we had our 1st Daughter so things got put on hold. About 16 Months later we had our second Daughter, so things got further put on hold: All the while though I was looking at the plans and reading through the forums.

I even decided to try to fashion a Pizza oven out of our charcoal grill. I bought 12in unglazed tiles from Home Depot and lined my grill with them. Seemed like a decent alternative? boy was I wrong. In case anyone is thinking of trying it let me tell you what you will get. You start the charcoal and get the grill and tiles up to 600deg, this takes about 45 min. Then you are ready for your pizza? you open the grill cover and in comes the cold air: so now you have a tile floor that is 600deg and a dome that is around 200deg. You will wind up with a black crust and uncooked toppings? NOT good pizza.

So, after our last bbq pizza debacle, we decided it was time for a real pizza oven. I broke ground a few weeks ago. Because of the limits in our yard, it will be a 32in i.d. oven with a 16 in dome. I figured the door should be about 15 in wide and 10 in tall, so I can't make any jumbo pizzas, but that is no big deal. I won't be the "ultimate" dream oven, but it will be 100% better than the pizza oven we have now. I went with the higher dome because I do like to bake bread too.

Anyway, I welcome any comments and critique; I know anything said here will be said in the best interest of my oven and the FB community in general.

Best,

Chris
Sherman Oaks, Ca

P.s. The oven will be named "cave canem"... 10 points if you get the reference, no fair Googleing it.



Sent from my iPad