Forum Notice: The forum has been upgraded and restored to November 2. Posts and new accounts created after November 2 were lost. Sorry for the inconvenience.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The base will get a render and the woodstore will have a door. Then I'm going to do a kind of wood decking style surface to cover over the concrete slab and overhang a bit to provide some working surface.
I've made up my weatherproofing door over the last few days. The wood was part of an old tabletop, sanded down, and four coats of varnish. With a couple of handles and a weathersealing strip around it.
Banana and Confiture de Lait (Milk Caramel sauce) dessert pizzas. Made 2.
Next time I need to go hotter and build a bigger bed of embers. I aimed to not overload the oven this first time, but I know it can higher to get that really spotty effect on the crust.
G'day
That outer coating of brick will go a long way to waterproofing the oven. But you still have the Achilles heel of any oven in the open and that's the hearth at the entrance. That hearth brick will soak up any rain that falls on in. It will wick into your oven and of course your insulation will soak it up real fast. A tarp laid on the hearth is a good enough temporary measure, but a outer door is what you'll want in the long term.
Regards dave
Yep, I'm planning on building an outer door for this reason.
Did some more pointing today, finished the chimney and started on the dome.
G'day
That outer coating of brick will go a long way to waterproofing the oven. But you still have the Achilles heel of any oven in the open and that's the hearth at the entrance. That hearth brick will soak up any rain that falls on in. It will wick into your oven and of course your insulation will soak it up real fast. A tarp laid on the hearth is a good enough temporary measure, but a outer door is what you'll want in the long term.
Regards dave
Since the last post I've completed the dome brickwork and finished with a concrete plug. I had wanted to wait until I'd fired the oven a few times (to drive any possible moisture out), but it has been raining every other day and firing it means I have to move the canopy. I decided that just getting it waterproofed and able to fire it without worrying about rain is more important.
Today I moved the canopy aside and started the normal curing schedule. Goodbye to my clean brickwork
The side walls reached 150c/300f after a couple of hours and I kept it there by feeding more briquettes for a few more hours. Tomorrow I'm going to start it early and try to get it a bit hotter all day, and then move onto wood the next day.
Does anyone have experience getting old permanent marker out of firebrick?
Leave a comment: