If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Got some more work on the oven done this past weekend. I started getting into the chains where gravity is no longer a friend of mine. I fabricated up these simple and easy to make brick holders out of truss straps that are adjustable so you can "fine tune" the brick setting. After I bent them, I drilled the holes out so I could run a 1/4-20 tap in them. They work great and hold the brick in place until the FB mortar can take hold.
sometimes a small grout line just looks beautiful!! Great job. Don't rush it pizza is on its way b4 you know it
Thank you and I agree. It is hard not to "Rush" it but I know pizza will be coming out soon enough. On the plus side I just received all my GI Metal peels and oven tools yesterday.
You and your friends are going to admire the look of the inside of your oven. It is so cool to watch it get completely black and then soon when it gets to temp, your brick will clear and your oven will say...."Take a picture of me"
Well last weekend I did not get much done on the oven, worked on it Friday and got another course and a half done , then Saturday we spent all day running around Nashville, and Sunday it rained like Noah was coming, at least I got some time to bottle some wine.
This weekend went much better,, well as far as the oven is concerned anyway, no wine bottled but a little bit was consumed in celebration of the dome being completed. The last two courses did not come out as perfect as I would have liked but the key stone turned out centered and perfectly round, the final height of dome was 21-1/16". I started turning in the IT tool about course 5 one turn each course and ended up really close to the 21". Finished up any pointing and small fill in's that were needed so it is on to the vent landing and outer isolated arches.
Congratulations on the dome closing. Very nice looking bonds on the dome brick. It looks like you celebrated the right way . You should post some of the outlets for the Pond Water. I would like to chech it out the next time I head to the mountains .
Joe Watson " A year from now, you will wish that you had started today" My Build Album / My Build
Comment