40” Pompeii in Rhode Island

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • NewEnglandNewb
    Laborer
    • Dec 2022
    • 73

    #76
    The first pie has been cooked! We had a pizza night this weekend. I ended up making 3 pizzas. The pepperoni in the pictures was the first one cooked. I’m very happy for the first go at it, I definitely can improve the dough. I started with a fairly low hydration (58%), 24 hour proof, which I read would make it easier to handle the dough while I get the hang of it. It was a little more dense than I like. I will try a higher hydration next time.

    I finished grinding and polishing the concrete countertop landing as well. It still needs to be sealed before final installation. I’m happy with how that came out. It is pretty exciting to move from making a functional wood fired oven to making it look nice. Lots of brick and stonework to go, most of which will need to wait until spring when it gets warmer.
    Attached Files

    Comment

    • UtahBeehiver
      Member Moderator
      • May 2012
      • 5260

      #77
      Congrats, now comes the fruits of your labor. Each time you fire up the oven you learn some of the nuances of WFO and your own personal cooking. Enjoy the next phase. I see you in NE where winters are tough like UT. My polished concrete did not fair to well to the freeze/thaw cycles even with good food safe sealers and is spalling. Hope you have better luck. I am going to have to tile over with something more weather resistance.
      Russell
      https://photos.google.com/album/AF1Q...L9lr_UnUgJbF3Z

      Comment

      • SableSprings
        Moderator
        • May 2009
        • 1310

        #78
        You did a fabulous job on the oven! Pizza looks great and it's only the beginning...well done!
        Mike Stansbury - The Traveling Loafer
        Roseburg, Oregon

        FB Forum: The Dragonfly Den build thread
        Available only if you're logged in = FB Photo Albums-Select media tab on profile
        Blog: http://thetravelingloafer.blogspot.com/

        Comment

        • NewEnglandNewb
          Laborer
          • Dec 2022
          • 73

          #79
          Thanks guys!

          UtahBeehiver, I have about 95sq ft of matching concrete countertop in my outdoor kitchen, so I’m committed this point. That has survived 3 winters now. It dos require some maintenance. I have resealed it every year and this year I did fill a small crack. At some point I might splurge and replace it all with granite.

          Comment

          • NewEnglandNewb
            Laborer
            • Dec 2022
            • 73

            #80
            Concrete landing is sealed and ready for final installation.
            Attached Files

            Comment

            • NewEnglandNewb
              Laborer
              • Dec 2022
              • 73

              #81
              There are a few of the build threads that I really enjoyed reading that had pretty big gaps between updates and I was glad they came back to wrap them up. My last update was about a year ago. Most of this year my time in the back yard was using the pizza oven rather than working on it. I’m well over 100 pizzas cooked at this point. Other projects around the house took priority for most of the summer.

              I was keeping the oven covered with a tarp for most of the last year. Towards the end of the summer got going on water proofing the oven to get it ready for the winter. The first step was to cover the roof with red guard, which is a roll on membrane. I set up a tent over the oven at that point because I was worried about UV degradation of the red guard. I found a local roofing company that had some left over slate shingles from a big job. Time to get cutting!

              Comment

              • NewEnglandNewb
                Laborer
                • Dec 2022
                • 73

                #82
                I used a screw at the peek of the roof to secure a chalk line to determine the angle to cut each slate shingle. I kept them as tight together as possible and filled the gaps with a color matched grout. I also carved a rock for the peek of the roof.

                Comment

                • NewEnglandNewb
                  Laborer
                  • Dec 2022
                  • 73

                  #83
                  The face of the outer arch was getting a little blackened from smoke, so I decided to extent the chimney a bit to see if that would help with draw. I cast about 1.5” of pearlcrete around a piece of clay flue liner and used some homebrew to attach it. One coat of stucco on the extension and one coat over the entire chimney and it looked like it had always been that way. I’m happy with how that came out.

                  Comment

                  • NewEnglandNewb
                    Laborer
                    • Dec 2022
                    • 73

                    #84
                    For a chimney cap I used my brick saw to cut up a rock into four uprights to hold a piece of bluestone I had laying around from an old walkway. I think at some point I will make something a little bigger, but this does seem to work well keeping the rain out.

                    The white coating in this picture is Thoroseal, which is a vapor permeable sealer. I only added that on areas where I’m concerned with water intrusion. The entire outside of the oven will be finished with stone veneer, so the multicolored exterior won’t be visible when finished. With the cold setting in here that will be a next year task.

                    Comment

                    Working...