Tweet
Re: Oven Build In Central Alabama
At least Fred lost the tee shirt over long sleeve shirt look. That was pretty dorky.
At least Fred lost the tee shirt over long sleeve shirt look. That was pretty dorky.
-
Re: Oven Build In Central Alabama
Yeah, it took a while to convince him the Eighties were over."He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot[/CENTER]
"Success isn't permanent and failure isn't fatal." -Mike DitkaComment
-
Re: Oven Build In Central Alabama
Hey MetalHead,
Your Sketchup model looks great. I'm really impressed with your base and hearth slab. I can appreciate the hard work and attention to construction detail.
You asked me on my thread last week (I was gone on vacation) about my vent and smoke draw and it is still perfect. Smoke only swirls on the landing area and gets sucked up like there's an electric fan in there. It's really cool.
The deep (15") landing I made forced me to make a big flu-box opening above that forced me to be extra careful to design the way it narrows into the 8" duct and it was worth the trouble. I THINK I might have been able to do it with a 1 or 2" shallower landing area and still would have drawn nicely. But my outer arch is taller than the inner so all of that contributes to the vent draw. The flared opening also forces you to have a wider vent opening. I've seen recent posts here of sharper flares and narrower but at least a slight flare seems to work out for most lately. It's easier to get your door in too that way.
Sorry you have to put up with all that rain but we're taskmaster here on this Forum and need pics of progress, rain or shine!
Keep up the good work, Dino"Life is a banquet and most poor sons-of-bitches are starving to death." -Auntie Mame
View My Picasa Web Album UPDATED oct
http://picasaweb.google.com/Dino747?feat=directlink
My Oven Costs Spreadsheet
http://spreadsheets.google.com/ccc?k...BF19875Rnp84Uw
My Oven Thread
http://www.fornobravo.com/forum/f8/d...arts-5883.htmlComment
-
Re: Oven Build In Central Alabama
I have a strange sighting this morning. It is yellow orange with blue all around. There also appears to be these little points of light all over the blue area. Can anyone assist me in identifing the strange event?
Now of course after what seems rain for weeks, it is unseasonably cool with that Arctic blast comin down on us!!! Currently 36 degrees. But it appears its going to be nice today up to 58 degrees for the high. I'll see if it has dried up enough to do any thing.Comment
-
Re: Oven Build In Central Alabama
You set the sky on fire. Go get a bucket and put it out!"He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot[/CENTER]
"Success isn't permanent and failure isn't fatal." -Mike DitkaComment
-
Re: Oven Build In Central Alabama
[QUOTE=MetalHead;68067]I have a strange sighting this morning. It is yellow orange with blue all around. There also appears to be these little points of light all over the blue area. Can anyone assist me in identifing the strange event? [QUOTE]
Sorry, I haven't a clue. Our sky is usually the same as yours: a grayish to black hue with moisture droplets falling all the time. You might call NASA and report this phenomenon.
Were you able to get anything done?Comment
-
Re: Oven Build In Central Alabama
Hello - I am back. Wow it has been 9 months... Work sucks ...
But hey - got my Heat Stop 50 and Heat Cast 40 ordered.
I hope to get the pearlite out in a week or so and get this project going again.
Everyone around knows I am building this thing and keep asking me when the pizza part is.
Glad to be back.Comment
-
Re: Oven Build In Central Alabama
Hi! Welcome back!"He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot[/CENTER]
"Success isn't permanent and failure isn't fatal." -Mike DitkaComment
-
Re: Oven Build In Central Alabama
Well we got back going today. Had great weather to get back in the groove. The heat wave broke today and made a nice early summer day for making perlcrete.
Here are the forms we put in using leftover form materials from the base pour.
I even used recycled screws!!!Last edited by MetalHead; 07-03-2010, 01:24 PM.Comment
-
Re: Oven Build In Central Alabama
We tried 7 to 1 but it was just to dry for the perlite we had. We went on to 5 to 1 and got what I expected from all the reading.
We did a 5 to 1 mix (5 parts perlite to 1 part Portland Cement).
http://www.youtube.com/watch?v=HmcnBjv0Qv4
The cement was mixed 1.5 parts water to 1 part Portland Cement. This gave the slurry I was looking for and coated the fine perlite very well.
We will see how it does after I let it set for a week or two.
I was weird to see something that was so wet actually look like it was to dry... Strange, but that seems to be a common thread when doing perlcrete...
The perlite came from a block company here in the city and this type is used to fill block walls. Not the best, but all I could get at the time.Last edited by MetalHead; 07-03-2010, 01:26 PM.Comment
-
Re: Oven Build In Central Alabama
Well there we have it. About 6 hours / Rack of ribs (it is the 4th weekend) / and some beers later....
8 yards of perlite and 1 80lb bag of Portland cement. That gave me a 5 inches insulating layer.
We have covered it with plastic (not pictured) Had Coronas (not pictured ) and we will wait a week or two to see how it looks.
I think I am going to pour a 2 to 3 inch layer of Heat Cast next to beef up the base and then start with the floor.
Glad to be back FINALLY working on mt WFO !!!!
Oh - who is that masked man ??? Me of course and the other guy in the last set is my Brother inlaw. Working for future food options of course !!!
Now off to Bottega's to have some WFO food (He has a cook book out all over the country now)
http://www.bottegarestaurant.com/
We are going to the Cafe side.Last edited by MetalHead; 07-03-2010, 01:30 PM.Comment
-
Re: Oven Build In Central Alabama
I would not put a 2-3" layer of anything on there. It would be a good idea to wetset the floor brick in heatcast, but that is all you need.
Looking good!Comment
-
Re: Oven Build In Central Alabama
Originally posted by MetalHead View Post
Rub it in, why don't you?
"He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot[/CENTER]
"Success isn't permanent and failure isn't fatal." -Mike DitkaComment
-
Re: Oven Build In Central Alabama
Well hard to believe it has been a year !! Man - I am finally trying to get back moving on my oven. Been getting ribbed all year to see when it will be done. I have some help lined up and will get moving shortly. Man I have seen some cool advances and got to read some neat stuff the last few days. So I am looking forward to getting those ideas into my build.
Did I mention it is hot as fire around here !!! 100 today. At least I have a shade !!!Comment
-
Re: Oven Build In Central Alabama
By 'shortly' you mean 'October', right? The heat indices are in the red zone all over the state. It's in the mid 80's outside now - 9:15 pm!
No dying in the process - it's against the rules!
Personally, I'm buying Gatorade stock..."He is no fool who gives what he cannot keep to gain what he cannot lose." - Jim Elliot[/CENTER]
"Success isn't permanent and failure isn't fatal." -Mike DitkaComment
Comment