I am planning to build a wood fired oven. I consider myself an inept brick layer.How difficult is it to build? should I go to a precast refactory dome instead?
X
-
I am pretty sure that most people start this project with little or no brick laying skill (I know I did). You learn along the way, and frankly, it doesn't have to be perfect...
If you can afford the precast dome, it is sure easier as the stand itself is quite a lot of work. But then you don't get the "pride of authorship"...
DrakeMy Oven Thread:
http://www.fornobravo.com/forum/f8/d...-oven-633.html
-
Pompeii
Originally posted by DrakeRemorayI am pretty sure that most people start this project with little or no brick laying skill (I know I did). You learn along the way, and frankly, it doesn't have to be perfect...
If you can afford the precast dome, it is sure easier as the stand itself is quite a lot of work. But then you don't get the "pride of authorship"...
Drake
Comment
-
Inept is ok
If you are beginning the project as an inept brick builder that's probably better than many of us who built a brick dome. I started the project with credentials of inept floor tiler, no brick experience. It takes more courage than skill. This forum and the wonderful Pompeii plans gave me all the information I needed.
Have fun!
Comment
-
Comment