Announcement

Collapse
No announcement yet.

which vermiculite to use

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • which vermiculite to use

    The only vermiculite I have found in my area is a fine sand like prouduct used to insulate concrete block. Is this ok to use for the insulating pad and cap.
    Thanks Larry
    Last edited by lcmort; 05-27-2007, 06:29 AM.

  • #2
    Re: which vermiculite to use should be uncoated

    Originally posted by lcmort View Post
    The only vermiculite I have found in my area is a fine sand like prouduct used to insulate concrete block. Is this ok to use for the insulating pad and cap.
    Thanks Larry
    (M) If you have found a Vermiculite that has been coated for easy pouring into the cores of your cement block, that is not what is recommended for insulation. Coated Vermiculite, or Perlite will not readily absorb the water necessary for proper hydration of your "Perlcrete". If you're mixing an insulating "concrete" get the uncoated common garden - horticultural variety.

    Ciao,

    Marcel
    "Everything should be made as simple as possible, ...
    but no simpler!" (Albert Einstein)

    Comment


    • #3
      Re: which vermiculite to use should be uncoated

      Thank you this helps a lot.

      Larry

      Comment

      Working...
      X