Re: Karangi Dude's 48inch Oven
Last course, just the plug to go!
Used the same method I used for the 12th course for the 13th and last course this time I screwed a small 6mm disk to set the angle back, I will then trace the hole left onto the little disk and use this as a template to make the keystone
Now I just need to make a keystone and it is all closed up YEH!
Doug
Last course, just the plug to go!
Used the same method I used for the 12th course for the 13th and last course this time I screwed a small 6mm disk to set the angle back, I will then trace the hole left onto the little disk and use this as a template to make the keystone
Now I just need to make a keystone and it is all closed up YEH!
Doug
Comment