Announcement

Collapse
No announcement yet.

D105 Pre-Cut brick kit build in Tassie

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I installed the stone hearth last weekend - all went well and celebrated with pizza on Saturday night.
    Cheers,

    Steady

    http://www.fornobravo.com/forum/f51/...ild-21760.html

    Comment


    • Nice looking stone and final product.
      Russell
      Google Photo Album [https://photos.google.com/share/AF1Q...JneXVXc3hVNHd3/]

      Comment


      • G'day steady
        Looks great as I thought it would.
        I'm pretty impressed you've only been cooking for 6 months and you've finished it.
        Regards dave
        Measure twice
        Cut once
        Fit in position with largest hammer

        My Build
        http://www.fornobravo.com/forum/f51/...ild-14444.html
        My Door
        http://www.fornobravo.com/forum/f28/...ock-17190.html

        Comment


        • Thanks UtahBeehiver and cobblerdave - I have some more work to do on the stand (render/stucco) and then I want to make some benches on either side with space for a BBQ and sink etc + some sort of covering to help get more use during the winter + some paving - I doubt I will ever finish finish :-)
          Cheers,

          Steady

          http://www.fornobravo.com/forum/f51/...ild-21760.html

          Comment


          • Nice work. I notice that you haven't installed a flue pipe. Although it is not really necessary apart from keeping the smoke away from your face it also creates more draw and should stop that blackening on the front of the arch opening.
            Kindled with zeal and fired with passion.

            Comment


            • Originally posted by david s View Post
              Nice work. I notice that you haven't installed a flue pipe. Although it is not really necessary apart from keeping the smoke away from your face it also creates more draw and should stop that blackening on the front of the arch opening.
              Thanks david s,

              I do have a flu - I just take it off and put an upturned bowl over the sharp stub end before wrapping it up with a tarp. If you look at the 4th photo above that doesn't show as a thumbnail it shows the flu in situ.

              Regarding the blackening, I think I am not going to avoid it. Mrs Steady is suggesting that I either paint just the arch, or all of the exposed bricks black - I am undecided but I can see her logic.

              Once it is done it would be hard to undo. They are fire bricks and I have already sprayed them in heat/flame resistant clear paint made for combustion engines etc to reduce how much water they will absorb.
              Cheers,

              Steady

              http://www.fornobravo.com/forum/f51/...ild-21760.html

              Comment


              • Ahh, yes I see. Far easier to cover the oven with the flue pipe off. If you want to do something about the front arch you could clean it up a bit with a wire brush and tile/mosaic it. You need to use glossy tiles, a quality outdoor tile adhesive and black grout. Any soot staining rubs off easily with some damp newspaper.
                Last edited by david s; 03-21-2016, 04:18 AM.
                Kindled with zeal and fired with passion.

                Comment


                • Thanks David, I will have a look at some oven photos where the front arch has been tiled to see if like the look
                  Cheers,

                  Steady

                  http://www.fornobravo.com/forum/f51/...ild-21760.html

                  Comment


                  • Hi Steady what size was your oven stand as I'm looking at building this size as well in a corner.

                    Comment


                    • Originally posted by Matt Taylor View Post
                      Hi Steady what size was your oven stand as I'm looking at building this size as well in a corner.
                      Hi Matt, welcome to the Forno Bravo Forum.

                      My stand is 4 blocks wide x 4.5 blocks deep (nominally 1600 wide x 1800 deep)

                      If doing it again (and in a corner) I would rotate the stand 45 deg and cut the corner off, there are many examples of it being done that way on this forum.
                      Last edited by Steady; 02-06-2017, 05:21 PM.
                      Cheers,

                      Steady

                      http://www.fornobravo.com/forum/f51/...ild-21760.html

                      Comment

                      Working...
                      X