Announcement

Collapse
No announcement yet.

Help with top of chimney please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with top of chimney please

    Hi Guys,

    I am building my brick chimney and wondering how I finish the top of it, I am putting an anchor plate about 700mm above oven floor with 8" flue coming off it 2 mtrs high, I will build bricks up a few courses above anchor plate but I am just wondering what my options are for enclosing the flue at the top of bricks, I will attach my rough sketch.

    My complete guess's;

    -Do I fill around flue with refactory mortar mix and if so what stops it all falling down the chimney whilst I put it in? and do I need something between mortar and flue to prevent cracking and water coming in?
    -Do I use flashing, if so do I need to fabricate it myself and out of what? then how do I create a waterproof seal around flue pipe?

    Any help would be greatly appreciated, sorry if this information has been done 100 times over.

    Thanks
    Click image for larger version

Name:	chimney drawing.jpg
Views:	426
Size:	643.6 KB
ID:	430293
    Attached Files
    Paul,
    My 42" Pompeii build - Carrum Downs, Vic, Australia
    https://community.fornobravo.com/for...s-my-1st-build
Working...
X