Show us your Door Thread

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JRPizza
    Member Moderator
    • Jan 2012
    • 1557

    #106
    For those that have build their doors with and without thermometers, what are your thoughts? Reading through this thread and the forum, there seems to be a pretty even split between with and without. I have read that air temperature is not the best indicator of how hot the oven is - do those without wish they had them, and are those with glad they have them in their doors?
    My build thread
    https://community.fornobravo.com/for...h-corner-build

    Comment

    • deejayoh
      Il Pizzaiolo
      • Jul 2010
      • 1893

      #107
      Mine is pretty reliably off by 50 degrees F to the low side. It's nice to know at a glance where the oven is, even if it is not 100% accurate.
      My build progress
      My WFO Journal on Facebook
      My dome spreadsheet calculator

      Comment

      • UtahBeehiver
        Member Moderator
        • May 2012
        • 5260

        #108
        JR,

        My door is without a thermometer. I installed TCs, in the the dome to measure heat saturation but I hardly ever use them now (maybe when I start baking bread it might be different). For the most part I just use my thermo gun to get a ball park temperature similar to what DJ says.
        Russell
        https://photos.google.com/album/AF1Q...L9lr_UnUgJbF3Z

        Comment

        • oasiscdm
          Il Pizzaiolo
          • Jan 2012
          • 1239

          #109
          Hi JR

          I have thermometer in door and 2 thermocouple insertion tubes on each side of my oven. one tube on each side is 10mm from the inside of the oven the other tube on each side is about 15mm from the outside of the firebrick.

          ​reason is I use either side to cook, I use the temps to determine my equalisation temperature. i use the half way point of the 2 temperatures to determine when I close the door shutting it 50c above the temperature i desire for cooking the following day. Seems to work really well.
          Cheers Colin

          Oven 1 Completed

          Oven 1 and surrounds

          My Build - Index to Major Build Stages

          Comment

          • JRPizza
            Member Moderator
            • Jan 2012
            • 1557

            #110
            Well, I'm afraid the ship has sailed on thermocouples, unless I want to do exploratory drilling into my almost completed dome. Colin, are you saying you mostly use the TC's and the door thermometer isn't as useful for you?
            My build thread
            https://community.fornobravo.com/for...h-corner-build

            Comment

            • david s
              Il Pizzaiolo
              • Mar 2007
              • 9209

              #111
              Thermometers in the door are subject to accidental damage and thermocouples will fail sooner or later. After you have used your oven a fair bit you rely less and less on temperature measurement. Providing my oven is pretty dry I usually use the time taken to fire the thing as a guide to temperature e.g.. one hour of flame for roasting or baking and one and a half to two for pizza. WFO's are also pretty forgiving in regards to temperature. When it starts to smell good it's usually good, If it's not cooked enough put it back in until it is. A cheap oven air temp thermometer placed inside the oven is excellent as is one of those thermometers you stick into the centre of a roast or bread loaf. IR thermometers are good but can give false readings because they are reading surface temperature. They're ok if used after the oven has been sitting unfired for a fair while.
              Kindled with zeal and fired with passion.

              Comment

              • DaveHI
                Peasant
                • Jan 2007
                • 46

                #112
                I made a mess on doors with my first oven in Hawaii. Built the oven and then tried to find someone to make me a metal/insulated door without much luck unless I wanted to spend $600 --nope. My own wood efforts with tile backer worked ok but they tended to fall over when I used them for draft doors and suddenly I had extra fuel.

                For my new nat gas oven, I found a guy on Etsy that makes door. Haven't tried it as I'm just now at the last ring/final keystone stage but it looks pretty cool. At least I can't burn it up!

                https://www.etsy.com/listing/2746997..._home_listings

                Comment

                • madspeed
                  Serf
                  • Aug 2016
                  • 2

                  #113
                  looks like that Etsy shop makes doors to order based on your specs. Good deal at $125 for those without handy skills, nice find

                  Comment

                  • deejayoh
                    Il Pizzaiolo
                    • Jul 2010
                    • 1893

                    #114
                    Originally posted by madspeed
                    looks like that Etsy shop makes doors to order based on your specs. Good deal at $125 for those without handy skills, nice find
                    Its a pretty good price, but for those who are interested in learning to weld - you can buy the same flux-core welder I got at harbor freight for ~$70 after the discount, get some mild grade steel, and go to town. I found the welder on Craigslist so I think I paid $60 for it + a welding mask and gloves.
                    My build progress
                    My WFO Journal on Facebook
                    My dome spreadsheet calculator

                    Comment

                    • DaveHI
                      Peasant
                      • Jan 2007
                      • 46

                      #115
                      To report back -- It works well. Obviously more heat loss than a wooden door since steel has such high thermal conductivity, but I think I might make a second door out of hardwood to back it for when I'm trying to hold heat.

                      It did start rusting here by the beach even with 3-4 coats of high temp clear spray paint on it. Cleaned it up and went to black paint.

                      Comment

                      • shanxk8
                        Apprentice
                        • Nov 2010
                        • 201

                        #116
                        Started on my permanent insulated door and have been slowly working away at it. I'm sure it will evolve over time, perhaps eventually get replaced.
                        It still requires some finishing with rustic hardware, but it is more functional than a straight wood door to retain heat. It is 22G plain steel, bent, and attached with machine screws.
                        David in Calgary
                        My Build Thread

                        Comment

                        • djginivisian
                          Peasant
                          • May 2011
                          • 28

                          #117
                          Oven door design and material Choices:

                          I'm ready to begin the door construction

                          The back of the door will recess 4" into the oven opening.

                          To insulate, I am weighing the pros and cons between CFB, Fireblanket, or Foam glass block.

                          Also considering best gauge stainless to use, with strength, durability and weight being factors.

                          Will likely have two spring door handles.

                          Opting not to include a thermometer

                          Does anyone care to weigh in with some facts & opinions?



                          Attached Files

                          Comment

                          • UtahBeehiver
                            Member Moderator
                            • May 2012
                            • 5260

                            #118
                            Building a 4" thick door will give you a lot of insulation power but weight will be a factor. IMHO, Ceramic Blanket, Foamglass and ceramic blanket have roughly the same K value (thermal conductivity) so use the one that is the lightest in weight. SS has the lowest K value of carbon steel, aluminum so best metal choice but get as thin as possible and still be weldable.I can't tell from pic but it looks like the reveal is failry small, 1/2" or so. Some builders are using wood stove gaskets for tighter seals but I did not. Not sure a door thermometer gives a true internal temp. I use a laser gun.
                            Russell
                            https://photos.google.com/album/AF1Q...L9lr_UnUgJbF3Z

                            Comment

                            • JRPizza
                              Member Moderator
                              • Jan 2012
                              • 1557

                              #119
                              Here are the details of my door, which is also around 4" thick. The weight came in at 10lb 6oz.
                              I've been working on my oven for a little while and have been debating starting a build thread, as I probably won't have much to add in terms of artistry or inventiveness over the excellent work already posted on this forum. That said, I thought I would share what I have done and hopefully continue to get
                              My build thread
                              https://community.fornobravo.com/for...h-corner-build

                              Comment

                              • ogopogodude
                                Apprentice
                                • Feb 2017
                                • 102

                                #120
                                Here is my door ... (it seems so plain and simple compared to others' doors. I must say, that I really want a thermometer now that I have seen others' pizza ovens)
                                Attached Files

                                Comment

                                Working...