Barrel Style oven layout question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • meco211
    Laborer
    • May 2010
    • 81

    #16
    Re: Barrel Style oven layout question

    My layout is going to be a bit different, but i think it is the same concept. Attached is a picture that shows the layout
    Toby

    Columbus, NE

    Comment

    • Tscarborough
      Il Pizzaiolo
      • Oct 2009
      • 3341

      #17
      Re: Barrel Style oven layout question

      That is almost exactly how my plans began (with the exception of the angle, I don't like metal in the mix). As I worked through it on paper and stacking bricks, I changed it to what it is now for both simplicity and for strength.

      Comment

      • Mitchamus
        Journeyman
        • Aug 2008
        • 389

        #18
        Re: Barrel Style oven layout question

        That's Rado Hands design for the Swishy Oven right?
        -------------------------------------------
        My 2nd Build:
        Is here

        Comment

        • meco211
          Laborer
          • May 2010
          • 81

          #19
          Re: Barrel Style oven layout question

          yeah, i am doing mine pretty much like his, but putting a soldier course at the bottom
          Toby

          Columbus, NE

          Comment

          • meco211
            Laborer
            • May 2010
            • 81

            #20
            Re: Barrel Style oven layout question

            Mitch

            I was looking at your photos of your build and it looks like you used the plans from Radio as well. Are you happy with the oven? I really liked his design
            Toby

            Columbus, NE

            Comment

            • Mitchamus
              Journeyman
              • Aug 2008
              • 389

              #21
              Re: Barrel Style oven layout question

              Yep - I built the oven for my parents.

              The only changes i would make would be to insulate it better so it doesn't take so long to heat up. (2-3+ hours)

              It really needs more insulation under the floor, and some insulating blanket over the vault roof.

              If you got both sets of plans - in the extra stuff you can see a backyard build where they use some blanket on the vault roof.

              I would definitely do that if i had my time over.
              -------------------------------------------
              My 2nd Build:
              Is here

              Comment

              • meco211
                Laborer
                • May 2010
                • 81

                #22
                Re: Barrel Style oven layout question

                Thanks, i might put more on the top, but since i have already layed the floor and walls i am kinda stuck
                Toby

                Columbus, NE

                Comment

                Working...