Announcement

Collapse
No announcement yet.

My first WFO design, any comments before I build?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ok, give it a try, but filling cracks is rarely successful. Generally once they’re there then thy are there to stay.
    Kindled with zeal and fired with passion.

    Comment


    • david s I think I'l let the cracks inside the dome for what they are. They don't bother me..

      The crack on the front that was caused by the expanding and contracting flue pipe is something I would like to fix though. I was thinking about drilling a space around the flue pipe entry in the opening of the oven and fill it with heat-resistant sealant. Is this how you would go about doing it?

      Comment


      • You could make a few expansion cuts with a mini grinder inside the chimney pipe or even better remove that pipe and fit a 150mm pipe on top of the opening.
        That Vitcas silicone is ok in none flame path locations, it is not a hard setting silicone but is a good product for sealing certain components.

        Comment

        Working...
        X