Since this is a oven construction thread I will continue the build through its present day status. Back several pages ago I left off at the chimney build, here are some more pics as a refresher/update. The steel is getting completed for the enclosure. I am standing on the steel wall to both reach the chimney and test the loading of the wall. Wall passes the over weight test beautifully!

A couple of pics of my over engineering the supports for the chimney and arch butressing. I used angle iron and unistrut to build both a platform to hold the weight of the bricks and side support for the arch/vent area. Way over kill IMHO

Leave a comment: