If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
You guys are too good with Sketch-up or what ever graphics program you used. My computer is a steno pad and a pencil. Looks like a fine pergola..............
When I look at the shape of your finished oven, and the stone that you you chose, I am reminded of a "medievial castle". I was just thinking that a couple of banners flown form each of those out side piers wouls set it off perfectly.
I think that this banner would work .
Joe Watson " A year from now, you will wish that you had started today" My Build Album / My Build
I finally built a door for the wood storage section of WFO. Instead of just building a door, I also built a rack with wheels to attach to the door. On a rack, I placed a Japanese grill which is also made out of firebrick with no mortar/adhesive. Both side of the grill, I attached some vents onto firebrick to gauge the air flow in order to control the heat. The idea of using a Tuscan grill inside WFO sound pretty cool but it is hard to monitor and cook the food that is being cooked on the opposite end. I placed some insulated firebricks between the wood and regular firebrick to protect the wood. I know that it may still catch fire from the top but I like to live on the edge.
I love it! Nice work as per usual. I reckon some alfoil just laid around the sides over the wood while cooking will prevent any burns and also make it easier to clean up afterwards.
I finally built a door for the wood storage section of WFO. Instead of just building a door, I also built a rack with wheels to attach to the door. On a rack, I placed a Japanese grill which is also made out of firebrick with no mortar/adhesive. Both side of the grill, I attached some vents onto firebrick to gauge the air flow in order to control the heat. The idea of using a Tuscan grill inside WFO sound pretty cool but it is hard to monitor and cook the food that is being cooked on the opposite end. I placed some insulated firebricks between the wood and regular firebrick to protect the wood. I know that it may still catch fire from the top but I like to live on the edge.
G'day
Have you tried a Tuscan grill? They are a great piece of "kit". Mines just a basic BBQ grill with 4 bolts for legs. Burn a fire , not a pizza grade one either for an hour. It's not about clearing the oven its about building a good coal bed. Arrange your coals at just inside the door 20 mins and the grills hot. Steaks cooks fast and tender because of the heat cast back from you dome. As for tools and reaching in, yes I have a long set of tongs and a BBQ spatular but you lose more arm hairs cooking pizza. Best thing its like using a hooded BBQ without having to lift the hood to see how things are cooking. Family favorites are boned whole chicken and boned leg of lamb, and my only stuff up to date was to fit the grill in the oven with the bars running parallel with the entrance , everything stuck and the resulting chicken didn't look that whole . But you could certainly eat it that's a good result.
Promise you its worth the experiment
Regards dave
Measure twice
Cut once
Fit in position with largest hammer
When I look at the shape of your finished oven, and the stone that you you chose, I am reminded of a "medievial castle". I was just thinking that a couple of banners flown form each of those out side piers wouls set it off perfectly.
I think that this banner would work .
I love it! Nice work as per usual. I reckon some alfoil just laid around the sides over the wood while cooking will prevent any burns and also make it easier to clean up afterwards.
I didn't think of using the alfoil around the sides. Thanks for the suggestion!
G'day
Have you tried a Tuscan grill?
Promise you its worth the experiment
Regards dave
The main reason why I create the grill is because of the excess amount of WFO charcoal that I throw away in the last two years. Every time I heat up the oven for a big bake, I usually don?t let the wood to be completely burn to ash. When the oven is heated enough, I just stop the oxygen flow with the door to stop the fire. Then I removed the black charcoal from WFO into can to throw away later. It just hit me one day that why can?t I used this charcoal to grill some meat while waiting for my WFO temp to drop down for bread. As of late, I have great interest in Japanese style grilling such as yakitori which required a lot of constant basting over the grill. Japanese traditional used binchotan charcoal for their grill but binchotan is very expensive. This allows me to burn all the stuff down to ash which will be use later as fertilizer.
Comment