web analytics
Where can I find the indispensible tool. - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Where can I find the indispensible tool.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Where can I find the indispensible tool.

    Hi ,

    I'm about to start building my own pizza oven.
    Looking for indispensable Tool or if someone has one willing to sell?

    Thank you,
    Dan

  • #2
    Most make their own it seems......here is the guide I used......

    https://www.youtube.com/watch?v=oMf32antfNY

    https://picasaweb.google.com/1029081...00165373509921

    Comment


    • #3
      That's a great link Damer419..

      Comment


      • #4
        Not to discount the youtube video but there are some inherent design issues with that IT which could cause some construction problems. One of the main baseline design on the FB forum is shown on the attached link. There are many variations of this design, some non welded as well. But a few key items are important. One, the pivot point on the floor should be as close as possible to the floor level, two, the IT rod needs to be adjustable (an inch or so), three, the centerline of the IT rod must intersect the centerline of the brick so you brick bracket needs to be mounted to the rod accordingly. If do not have access to a welder or someone who can weld there are many non weld versions.

        https://community.fornobravo.com/for...-on-a-fb-theme

        Also here is a link to some of the more documented builds on the forum

        https://community.fornobravo.com/for...n-the-archives
        Russell
        Build Link............... Picassa Photo Album Link

        Comment


        • #5
          Or you can do the simple method with cord.
          You can see my post #201
          https://community.fornobravo.com/for...d-to-36/page14

          Comment

          Working...
          X