Oven number two..
Collapse
X
-
Re: Oven number two..
Brikie,
That looks awesome. I would love to get some bluestone like that where I live. Oh well, lick and stick rock it is for me!
ChrisComment
-
Re: Oven number two..
your hobby is laying bricks ...wierdo nah looks good brickie when your in brisbane next let know and you can practice on my next oven
Comment
-
Re: Oven number two..
Just a quick safety note.
I have a full face helmet that draws air in and blows it down your face after filtering it twice down to 2 micron.
Similar to this one (just an older version)

But after a few hours on a wet saw I could feel my nose getting crusty from the dust, a paper mask just wont do.Comment
-
Re: Oven number two..
Brickie,
Try slapping some product on the stand like Bondcrete or Silasec to prevent rising damp, before you cast the slab. You won't be able to do anything about it once that slab is down.Kindled with zeal and fired with passion.Comment
-
Re: Oven number two..
Im putting corrugated tin inside the top as there a few voids that cant be over come, I think the tin will stop any moisture.
You can see Ive left piers to support the corry, Ive used some old hard bags of cement that got wet as filler next to the old oven base.2 PhotosLast edited by brickie in oz; 03-05-2011, 06:08 PM.Comment
-
Re: Oven number two..
Here is the look Im aiming for.
Ive tried to keep with the Fibonacci sequence or Golden Mean where possible, which is 63%.1 PhotoLast edited by brickie in oz; 03-05-2011, 07:33 PM.Comment
-
Re: Oven number two..
Some rough set outs of the oven and opening.
Im thinking of putting insulated half fire bricks at the front for a thermal break.
The cavity will be ceramic blanket and loose vermiculite, and the whole oven covered in loose vermiculite.3 PhotosComment
-
-
Re: Oven number two..
After the concrete had gone off a while I marked a few reference points into it.
Centre both ways and 350mm (1 1/2 bricks) in from the edges.
I have to aim for a slot already cut into the roofing from the last oven so need to be fairly accurate.
2 PhotosComment
-
-
Re: Oven number two..
I had this arvo off so I played and done some more to the oven.
Some of the calcium silicate is recycled from the old oven and is 40mm thick.
I added 50mm pavers in between the CS and the fire brick floor tiles for thermal mass.3 PhotosComment






Comment