If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
While waiting for Brickie to practice driving on the right hand side of the road and getting some experience on the demolition derby circuit (which is by the way a great course) for learning how to drive in New Orleans . I got a little more time on the oven.
I just checked out the house prices in New Orleans..... why are they so cheap?
I went to max price if $300,000 and the same houses and land size here in Melbourne would be close to $1M........Im coming over to live and you can teach me how to say y'all.....
Comparison. Your end. My end.
The real estate at my end consists of buying one of three units with no land.
I can't really explain that Al. It may have something to do with many of the homes being near or below sea level. Also, New Orleans, still hasn't fully recovered from the last two hurricanes.
Come over Al,
You want have to be taught how to say ya'll. When you hear it every day, it just comes natural .
I just checked out the house prices in New Orleans..... why are they so cheap?
I went to max price if $300,000 and the same houses and land size here in Melbourne would be close to $1M........Im coming over to live and you can teach me how to say y'all.....
Comparison. Your end. My end.
The real estate at my end consists of buying one of three units with no land.
150 miles one way is not too bad, you just need a big enough vehicle to justify it.
I travel about that far to scavenge good firewood, I can get other stuff locally but it doesnt burn the same as the far away tree.
All right ya'll,
Here is the location of this mill with driving directions from the Dome.
There are small mills like this all over the Southeast of the US of A.
A retired friend of mine follows the seasons in a camper. He once told me that he searches for cabinet shops, and furniture manufacturing shops in the areas that he camps. He said that he is able to get the wood for his campfires for little or nothing in most cases. Another old retired friend of mine who lived across from my mother-in-law made hardwood rockers, gliders, swings etc. He had lots of scraps that he used to burn in his fireplace. An artisan like him may be a source for some wood. (Except in NOLA) I think that all construction materials sold in the "Big Easy" must be treated due to Formosa termite.
Tu,
Even a rounded pickup load (about 1/2 cord) of split red oak, delivered, over here is about 100 bucks. These guys only have to drive about 10 country miles to deliver in most cases. They cut and split the trunks to get a quick load and leave another load of oven sized limbs on the ground. I try to find where they are cutting and scavenge behind them.
Next time that I go for lotto tickets (just across the MS/LA line) I'll bring you a pickup load.
You got to be kidding!?! How far is that sawmill from New Orleans? I would open a WFO bakery within one mile from that place. I just spent about $265 for a full cord of red oak!
I got a little time this afternoon to get a slurry coat on the landing and ledges. I didn't get any pics. They don't look that much different anyway.
On the way back from from a Mothers Day family gathering, I stopped by a local sawmill to pick up some tomato stakes. They are 1" X 1" spacers used to separate the hardwood lumber while drying in the kiln.
All of this is outside of the gate free for the taking.
All oak, mostly red oak.
I feel for those who live in areas where hardwood is hard to come by. I am truly blessed .
Thank's Stonecutter,
My antique building experience always included a step down from the finished floor to the exterior levels (porches etc.) Also, just to explain the differences in local terminology, the "prow gable" that you referred to on another thread was commonly called a "boat bow" down here .
Boat bow huh? I always thought that term referred to more of the ridge line shape, not to an extended gable. Local terms have always interested me, you see it a lot with masonry and with how loose aggregate is described from place to place.
Thank's Stonecutter,
My antique building experience always included a step down from the finished floor to the exterior levels (porches etc.) Also, just to explain the differences in local terminology, the "prow gable" that you referred to on another thread was commonly called a "boat bow" down here .
Brickie,
As for as the "echo" is concerned, I've lived with a blonde for nearly forty years. Forgive me, if that one went over my head . Some of it may have rubbed off .
Leave a comment: