Announcement

Collapse
No announcement yet.

Texman Build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: Texman Build

    Hey all you FB wfo er's! Still cooking in Texas. I made some updates to kitchen to get more time in there. I screened in the kitchen and added plexiglass inserts for Winter. The whole thing just wedges in and can be removed, i don't even have a screw holding it in place at this point. It turned out good i think and i may just leave it there. I have a vent hood on order and will be installing soon. Too much smoke from the grill even when it was open.

    Cooked this weekend and i still struggle getting the pie off of the peel without throwing toppings to the back of the oven. there is a pic of pizza disgrace in the trash. I am using the good FB peel with holes and lots of flour. I am happy with the dough. I think i am making the pies too big when i have problems.

    What size is the norm out there ?
    Texman Kitchen
    http://www.fornobravo.com/forum/f8/t...ild-17324.html

    Comment


    • Re: Texman Build

      I use a screen for 14" and above. Below that it fits my peel. If you are having issues, there are a couple of things you can try.

      First, stretch the skin oblong perpendicular to the axis of the peel, that way when you pull the peel out, it stretches back into a round shape.

      Second and maybe most importantly, if you are having issues, you may try to adjust your technique. I say this because you mention throwing the toppings to the back, when if anything, you should be pulling them to the front. That is, the pizza goes in on the peel (with about a 1/2" of dough hanging over the front) tilted slightly down. Once you put the pizza where you want it, level out the peel and pull it back with a short, fast jerk.

      Comment


      • Re: Texman Build

        Love the butcher block table!

        If your loading peel has holes, that tells me it's made of metal. You may want to try a wood peel. Lots of flour on the peel and under the pie when I make it works wonders for unloading in many short, quick jabs. My pies are no larger than 13".

        Comment


        • Re: Texman Build

          Tracy -

          That looks great! Looking more like an addition than an outdoor kitchen at this point... I assume you have all the proper permits ;-)

          I've tried to think through some sort of cover for my kitchen area but never could come up with anything elegant enough to pursue
          My build progress
          My WFO Journal on Facebook
          My dome spreadsheet calculator

          Comment


          • Re: Texman Build

            I don't even own a wood peel, never have.

            Comment


            • Re: Texman Build

              i have tried both and Tscar is right-my technique is wrong. I try to throw it in so the toppings fly to the back. at least if the topping fall forward some could be salvaged as opposed to mine which are buried in the ash. my motion is going forward with a jerk backward. Do you guys try to ease the pie off or unload it in one motion? i have seen too many pizza videos i think of the pros. we were at a nice place in Florida with WFO pizza and i really think their dough was frozen or near that temp and they loaded the dough as ordered on cardboard and slid in from that. the dough was too rigid to not be very cold when it hit the oven. frozen dough would be easy, but not right i say.
              Texman Kitchen
              http://www.fornobravo.com/forum/f8/t...ild-17324.html

              Comment


              • Re: Texman Build

                The lip of dough helps quite a bit too, it grabs and helps pull the pizza off the peel.

                Comment


                • Re: Texman Build

                  Here a few that look better than the one in the trash.
                  They are all about 12-13" and not to heavy on toppings.

                  the metal peel is better IMO. I have tried both and have better success with the metal with holes. Saves flour too. it is tricky forming the dough and then transferring the dough to the peel, but after that it is better. using the edge trick from Tscar will help a lot. that will keep me from tossing it. the wood peels are good in the sense you can form load and place with one peel. But mine are all short handled and placement has to be quick because of the heat. I like the wood peels for serving and cutting really. most of the pies turn out decent, it is just about the time you think you can do this without disaster, the disaster strikes.
                  Texman Kitchen
                  http://www.fornobravo.com/forum/f8/t...ild-17324.html

                  Comment


                  • Re: Texman Build

                    I am sure that they taste fine. It can be a be the cause of some frustration when they don't come off the peel like in YouTube!
                    There are a few cheats that you can try to improve the result as you build your skill level to where it looks simple to do and works perfectly.

                    First up is to start them on a tray for the first little bit until the base sets and then transfer the pizza onto the floor of the oven.
                    Second is to build the pizza on bakers paper and do the same thing. The paper will burn around the edges but it comes off the peel easily and is easy enough to get a metal peel between the paper and pizza after 30 seconds or so if you grab the paper with some tongs.
                    The third is to assemble the pizza on a flexible kitchen board and transfer to the floured peel just before placing in the oven.
                    It is also easier to wrangle small pizzas than large ones in the oven for a start. I use wooden peels and flour with semolina for loading the oven and metal for turning and unloading.

                    I suppose it all comes down to what works best for you but if you have a lot of people assembling their own pizza then the paper works well for me.

                    Hope it is of some use.
                    Cheers ......... Steve

                    Build Thread http://www.fornobravo.com/forum/f3/n...erg-19151.html

                    Build Pics http://www.facebook.com/media/set/?s...1&l=1626b3f4f4

                    Forno Food Pics https://www.facebook.com/media/set/?...1&l=1d5ce2a275

                    Comment


                    • Re: Texman Build

                      Thanks guys. My pizza is better already thanks to you. gonna try and cook Sunday i hope.

                      Texman
                      Texman Kitchen
                      http://www.fornobravo.com/forum/f8/t...ild-17324.html

                      Comment


                      • Re: Texman Build

                        no more pizzas in the trash the whole pizza process seems to be coming together finally. I must be getting better because the pizza that you order is not good at all anymore.

                        Here are a few pics of some more mods:
                        1. vent hood for grill done (no fun) thanks to the wife and son for holding that monster while I mounted it. It is an island hood that i just used the chimney part to extend through roof. So i have a stainless chimney up there that is double walled. I had to add the vent hood since i have the winter enclosure of the kitchen.
                        2. added the towel bar to the island and hung some deco stuff i will never use but couldn't throw away on the side of the wfo.
                        3. filled a hole next to the oven counter transition that i needed to do for three years

                        I think i am done with the kitchen. I have gotten to the point that i stand and look for things to do, but i am not seeing much other than tinker stuff. i need to put an ass bumper above the fridge. i temped a piece of cedar for now. the fridge controls are on the front and that is a natural spot to lean. The ass keeps changing temps, turning lights on/off and making it beep each time which apparently only i can hear. i tried a steel pipe but the flanges are too large to fit and cutting them would look weird. So, when you can't work on the kitchen, i think it is time to cook in it. Nice to feel done but kinda sad too. I am sure i can find something to tweak. Should do anything to the area above the oven opening?

                        I hope to get back to the forum and give some help as i am able.

                        Texman
                        Texman Kitchen
                        http://www.fornobravo.com/forum/f8/t...ild-17324.html

                        Comment


                        • Re: Texman Build

                          Beautiful job, you should be proud of yourself.

                          Comment


                          • Re: Texman Build

                            I think i am done with the kitchen
                            I don't believe you, not one little bit!

                            Really, Tracy, your kitchen turned out beautifully, what a gorgeous space! You're right, tho. Something on the face of the oven will look nice, whatever you put up.

                            John

                            Comment


                            • Re: Texman Build

                              Originally posted by GianniFocaccia View Post
                              I don't believe you, not one little bit!

                              Really, Tracy, your kitchen turned out beautifully, what a gorgeous space! You're right, tho. Something on the face of the oven will look nice, whatever you put up.

                              John
                              Thanks John. I dont even believe myself. I have thought about a brick veneer chimney on the face like DJs kinda.

                              Texman
                              Texman Kitchen
                              http://www.fornobravo.com/forum/f8/t...ild-17324.html

                              Comment


                              • Re: Texman Build

                                A seriously great build there Texman !!!

                                I would love to see a whole lamb or suckling pig come out of your oven.
                                Micko

                                My oven build: http://www.youtube.com/watch?v=cpqakvZMhNw
                                My dome gauge/indispensible tool thread: http://www.fornobravo.com/forum/f28/...ive-20917.html (Dome Gauge - a simple alternative)

                                Comment

                                Working...
                                X