Announcement

Collapse
No announcement yet.

Wood Fired Beehive in Utah

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • stonecutter
    replied
    Re: Wood Fired Beehive in Utah

    No pics, I got home late. But I did check, and I've got a few baby tomatoes a bunch of blossoms. I think gulf had his in the ground a couple weeks ahead of me...not sure. It started getting hot here this week and we got a nice soak yesterday and today, after weeks of no rain.

    Leave a comment:


  • Gulf
    replied
    Re: Wood Fired Beehive in Utah

    Originally posted by UtahBeehiver View Post
    Gulf,

    I knew I should known better not of posted a pic of my measly SM plants knowing full well that their southern cousins would be ten times as big and already fruiting. Those are some might fine looking maters you got. At least I can say they're related................ My hands can only handle so much tin snipping before they cramp up. By the time I am done with the copper cladding I will be able to rip telephone books in half.
    Russell,
    They are not measly, it is just the difference in the growing seasons. You can't fight mother nature. When yours are producing great, I will be fighting mid season blights .

    What kind of snips are you using? The type that you are using may be the difference between easy cutting and carpal tunnel .
    Last edited by Gulf; 05-31-2014, 05:04 PM.

    Leave a comment:


  • UtahBeehiver
    replied
    Re: Wood Fired Beehive in Utah

    Gulf,

    I knew I should known better not of posted a pic of my measly SM plants knowing full well that their southern cousins would be ten times as big and already fruiting. Those are some might fine looking maters you got. At least I can say they're related.

    I was able to complete the starter strip around the base of the dome for the first course copper shingles today. I did three more strips in 2 hours what took me 6 hours for one yesterday. Well worth the effort to do a trial run and get it all dialed in. Got the card board templates made for the shingles on the first course. My hands can only handle so much tin snipping before they cramp up. By the time I am done with the copper cladding I will be able to rip telephone books in half.

    Leave a comment:


  • Gulf
    replied
    Re: Wood Fired Beehive in Utah

    Russell,
    I am looking forward to the copper cladding. I have a 10' break for aluminum, and I get to play on my brother's metal roofing break from time to time. So, I am watching with great interest.

    Our growing season is well under way. It is already hot down here, so the maters have really taken off. I have a few that should ripen in the next couple of weeks. I have several plants set out in various ways. Here are two that I am training to grow inside concrete reinforcement wire. Hopefully, without having to tie them up .

    Click image for larger version

Name:	maters2024A 002.JPG
Views:	1
Size:	588.8 KB
ID:	304680

    Click image for larger version

Name:	maters2024A 001.JPG
Views:	1
Size:	931.0 KB
ID:	304681
    Last edited by Gulf; 05-31-2014, 03:43 PM.

    Leave a comment:


  • the_dr_masuess
    replied
    Re: Wood Fired Beehive in Utah

    Where did you get your tomato plant for san maranzo tomatoes?

    Leave a comment:


  • oasiscdm
    replied
    Re: Wood Fired Beehive in Utah

    Go Russell, you know chopper as it ages ends with a greenish patina to it.

    But that will look great just simply bewdiful

    Leave a comment:


  • mrchipster
    replied
    Re: Wood Fired Beehive in Utah

    I can not wait to see this miracle in the making.

    Leave a comment:


  • deejayoh
    replied
    Re: Wood Fired Beehive in Utah

    Oh cool! looking forward to watching this one!

    Leave a comment:


  • UtahBeehiver
    replied
    Re: Wood Fired Beehive in Utah

    Well after watching all the great builds going on I finally decided kick it in the @3s and start the copper cladding of my dome. I first repaired all the render cracking with an elastomeric cement product used for chimney crowns. Then divided the dome into equal distant segments like an orange. I had to do a geometry refresher to find the true apex of the dome so the segments would be the same. I several practice bends with old heating duct work before I tried the copper. Glad I did, it took 4 trials to develop the right kind of bending and slotting to make the first course fit. I am using a 48" Malco bench brake as well as a 12" hand bender. So I finished out the day with my first 36" long copper base course. Also my San Maranzo tomatoes have blossoms but my guess there cousins with Gulf and Stonecutter already have tomatoes on the vine

    Leave a comment:


  • Gulf
    replied
    Re: Wood Fired Beehive in Utah

    Originally posted by mrchipster View Post
    We had snow last Wed. here again so plants are inside but they are growing.
    The ones under plastic are peppers and only about 5 micro leaves so far. But the tomatoes are starting....

    It may get to 60f today so I will take them out for some real air.

    Gulf, if you want your plants to stay strong have an ossolating fan blow on them from a distance the will get stronger stems.
    I agree, but they will also need much more light than I gave them this year. They were having to reach for it. I think that is what made them so tall and gangly. But, a combination the fan, the natural sun light, + the warmth (hot house) should do the trick .

    Leave a comment:


  • mrchipster
    replied
    Re: Wood Fired Beehive in Utah

    Originally posted by Gulf View Post
    Russell,
    I started mine in my sun room, just like last year. But, a good bit earlier. I don't have anything but the natural light coming form the windows. Waiting on warmer weather, and then the spring storms, these girls grew very tall and gangly! I guess that they were searching for a little more than just a little early morning and late afternoon sunlight. To make a long story short, mine are suffering from the shock of the "cold/hot cruel world". I will build a small hot house for next years .
    We had snow last Wed. here again so plants are inside but they are growing.
    The ones under plastic are peppers and only about 5 micro leaves so far. But the tomatoes are starting....

    It may get to 60f today so I will take them out for some real air.

    Gulf, if you want your plants to stay strong have an ossolating fan blow on them from a distance the will get stronger stems.
    Last edited by mrchipster; 05-06-2014, 06:18 AM.

    Leave a comment:


  • Gulf
    replied
    Re: Wood Fired Beehive in Utah

    Russell,
    I started mine in my sun room, just like last year. But, a good bit earlier. I don't have anything but the natural light coming form the windows. Waiting on warmer weather, and then the spring storms, these girls grew very tall and gangly! I guess that they were searching for a little more than just a little early morning and late afternoon sunlight. To make a long story short, mine are suffering from the shock of the "cold/hot cruel world". I will build a small hot house for next years .

    Leave a comment:


  • david s
    replied
    Re: Wood Fired Beehive in Utah

    Russell,
    We have a similar problem. My tomatoes are powering away, but the snow peas we transplanted have died because it's still too hot for them. We grow vegetables in the winter here so excessive heat at the start is often a problem.

    Leave a comment:


  • UtahBeehiver
    replied
    Re: Wood Fired Beehive in Utah

    Well,

    I got impatience and decided to try and harden my SM seedlings, bad mistake, wind, sun, and cold temps have beaten my little babies. They are back inside getting nursed back to health. I might be begging, Gulf and SC for 2015 seeds and have to go to nursery this year for maters if they don't survive.............

    Leave a comment:


  • Novaslo
    replied
    Re: Wood Fired Beehive in Utah

    I have the scan barcode that is my account. I think I can bring back just about anything.... Not sure though.

    Leave a comment:

Working...
X