If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The last course is complete …………yippy. It far from perfect a few chipped bricks from my over aggressive hammering and a few misalignments, other than that I’m happy.
Decided to make peace with my WFO widowed wife, I told her to take a look inside, she’s been on cloud 9 all day……. I’m sure I’m not the first……….. But this is pay back for my buddies that make me look bad all year long when their wives get flowers and mine doesn’t………. Who’s the poor sap sucker now?
KB, you will get cracks no matter what you do - peace out and don't worry about them - your oven build is close to perfect!
Thanks Boe. I'm calling it my first controlled expansion joint. It lines up directly with the seam in the hardie board I used as a permanent form board.
Thanks Utah and K79..... .........Dry fitted what I think is the last course today #13 before the afternoon rains began...............
K79, I liked the grappling hook idea. I was pulling my hair out using only the clay for dry fit of the 11th course. I was thinking where my treble hooks were and what type of line I was going to use, when I spotted the wife’s exercise ball....... So I deflated it and inserted. Thought the radius was going to be an issue, turns out to be a plus the ball can be inflated and deflate once all the course is fitted to check final alignment……
Working without the IT for tilt caused the dome to be slightly higher than planned. At one point I thought my dome was going to have a “Cone Head” like from the old episodes of "Saturday Night Live"…
I guess I got a little aggressive with the dry out lights below the hearth it reached near 200 degrees overnight. The hearth developed a hairline crack started on the last course of block and disappears beneath the oven……..Bummer!!!!!
Sorry I should have explained myself better on the suggestions. It’s a little clearer now on how to close the dome……….I was thinking of going back to a full size ? brick again. I’m glad I chose to stick with 1/3 size bricks, worked well. So to clarify myself, how should I fit the plug one, two, three pieces????
Ps. Should heard the wife scream when she saw her deflated ball left for dead on the pool deck cover in mortar........LOL
12th course complete.........The exercise ball is the ticket for dry fit and mortaring the courses......... Works well, over inflate set and mortar brick then deflate and make adjustments as you concentrically tap inward??looking for suggestions on how to complete dome closure.
My grappling hook idea worked well but to be honest the heat stop I used was so sticky that I never needed any forms at all. You might be surprised if you try the same.
12th course complete.........The exercise ball is the ticket for dry fit and mortaring the courses......... Works well, over inflate set and mortar brick then deflate and make adjustments as you concentrically tap inward……looking for suggestions on how to complete dome closure.
It's been 1 week since the tropical storm soaking.........Still wet as day 1........ bummer........Decided to do some pre curing with 500w lights below hearth, figuring that it may help the dry out????? Had to retire the IT for the exercise ball???..Whom ever thought of this was a genius???I thought the radius was going to be a problem seems to be working well with modeling clay???.11th course complete?..
Well my blue tarps were old and worn so the insulation got a pretty good soaking...............I replaced the tarps with new ones, this should keep any more water out…………
Sorry to hear about the leaks. It's probably a good idea to keep an old tarp to have under the new one. It will protect the new one from snags and tears as well as provide extra protection from rain. I know what you mean by wanting to be further along, in addition to the afternoon rains it going to be really hot soon. Still, it seems like your build is zooming along compared to mine. Bruce
Last edited by Bec1208; 06-10-2013, 07:20 AM.
Reason: Fixed quote box
Well are you still bailing out the oven or did it stay dry? Curious minds want to know. Bruce
Well my blue tarps were old and worn so the insulation got a pretty good soaking...............I replaced the tarps with new ones, this should keep any more water out………… The rainy season has begun in central Florida …………. So I’m Trying to dry out between the daily afternoon rain showers ……….. I was hoping to be further along at the time…………Once the chimney goes up, keeping the water out the enclosure will be quite a challenge before its completion.
Family has been in town so no progress lately......hoping to get something accomplished this weekend.
No work on the oven today............First tropical system of the year, tropical storm "Andrea"??. Warning in affect.........High wind and heavy rains and possible tornadoes for my WFO next 24hrs...... hope she can take it..........Pool already overflowing
Well are you still bailing out the oven or did it stay dry? Curious minds want to know. Bruce
No work on the oven today............First tropical system of the year, tropical storm "Andrea"??. Warning in affect.........High wind and heavy rains and possible tornadoes for my WFO next 24hrs...... hope she can take it..........Pool already overflowing
Steady, though light rain in Tallahassee so far. Hope you ride out the storm without problems. Bruce
No work on the oven today............First tropical system of the year, tropical storm "Andrea"??. Warning in affect.........High wind and heavy rains and possible tornadoes for my WFO next 24hrs...... hope she can take it..........Pool already overflowing
Leave a comment: